<![CDATA[The Reserves Network: jobboards]]> http://JOBS.TRNSTAFFING.COM/ en-us <![CDATA[Assembly]]> Mentor manufacturer has immediate openings for Home Assemblers

 

  • Piece work from day one ($9-11/hr average or more based on speed)
  • Must train at factory in Mentor from 8AM-4PM for four to eight weeks, then 25-30 hours a week from home
  • Year-round work

 

Requirements include:

 

  • Must live within 35 miles and less than 1 hour drive
  • Vehicle must be large enough to transport parts (pickup, minivan or large SUV)
  • Proof of insurance required
  • Minimum home space 8x8 designated area on the ground floor or a max of level up.
  • Carry 35 lb. containers from your vehicle to work area and back
  • Requires strong manual dexterity and speed
  • Pre-screening testing is required

If interested please send a resume to: mentor@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Assembly]]>

Mentor manufacturer has immediate opening for Millwork Assemblers

 

  • $13/hr

 

PURPOSE OF POSITION: Assemble millwork components, prepare subassemblies, and assemble finished product to package and prepare for complete product shipment.  Work consists of routine tasks, processes, and performing operations prescribed by drawings, work orders and procedures.

Duties and Responsibilities

        Required to work with other associates in assembly of millwork and casework

        Work as an integral part of assembly line on major casework runs

        Help with the addition of base, trim, crown moldings, and other items to various architectural component units

        Use of assembly machinery; case and frame clamp, table saw, chop saw and band saw after proper instruction has been established

        Manual dowel insertion for unusual items

        Hinge boring and insertion

        Hardware installation and reassembly of finished products

        Work with other associates in processing laminated tops, panels, and components

        Spray contact cement and apply required pre-coat spray to components

        Route, file, and clean laminated products for completion of project

        Maintain awareness of shipping schedules and adjust work capacity needs as required

        Keeps work area clean and safe

Requirements: Skills & Knowledge/Qualifications

        Possess working knowledge of woodworking and general assembly techniques

        Skilled use of sanders, glue machines, banders, and hand tools

        Correctly perform all aspects of routine work, meeting quality standards and requirements

        Must be able to achieve results in an accurate and timely manner

        Communicate effectively with co-workers, managers and others

        Be able to share knowledge and ideas with others on the team

        Perform activities that directly support team outcomes

        Flexible in cross-training

        Perform duties based on instructions and past practices

        Respond to direction in order to provide assistance to others

        May require some follow-up in new areas

        Must be able to take responsibility for own contributions to team/unit goals

        Maintain a safe, ergonomic work environment

        Must be able to lift repetitively materials and/or parts weighing approximately 5-10 pounds

        In order to get current job completed on-time may occasionally require overtime beyond traditional 50-55 hour work week

 

If interested please send a resume to: mentor@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Medical Billing]]> North Olmsted, OH Company has an immediate opening for a Contract-to-Hire Medical Biller/Re-Verification Specialist.

  • Hours are: 8am-5pm w/hour lunch, or 8:30am-5pm w/thirty minute lunch.
  • Salary is $12 an hour, $14-$15.50 once hired.

Recent Medical Billing college graduates are encouraged to apply!

Job Requirements:


Verify and report general patient information in the facilitation billing and collections activities.
Under general supervision, analyze and resolve benefits and insurance information; ensuring reconciliation of data within company-defined deadlines, and in compliance with company policies and procedures.
Generate and analyze diverse reports and work lists in the identification and resolution of general patient account issues.
Act as a liaison by working with cross-divisional teams in the identification and resolution of outstanding issues.
Assist with various projects as assigned by direct supervisor.

Experience and Required Skills:


1-2 years related experience: Explanation of Health Insurance Benefits experience required.
Strong Healthcare Collections and Medical Verifications experience preferred.
Detail oriented, good analytical and organizational skills; positive, enthusiastic and energetic attitude.
Excellent oral and written communication skills to effectively communicate with all levels of management.
Good interpersonal skills with the ability to work cohesively within a team environment.
Intermediate computer skills with working knowledge of word processing, spreadsheet and email applications; Excel & Alpha Numeric assessment required.

If interested please send a resume to: wcolbert@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Set Up Operator]]> Avon, Oh company has an immediate opening for a Punch Press Set-up/Operator.

$14.50+, depending on experience
Hours: 1st shift 7:00am-5:00pm, Mon Thur, 7:00am-4:00 Fri, possible Sat 6:00am-11:00am
Temp-to-hire potential

Duties include:
Performs typical progressive die and press operations (troubleshoot)
Setup and remove tooling
Setting up coil material, mounting dies and running production on automatic presses
Conduct visual quality inspections during production runs
Monitoring equipment/tooling during production stamping
Assist in setting up steel coil on larger press


Requirements include:
3+ years of setup/operator experience on 40-200 ton progressive die automatic presses
Able to read micrometers and dial calipers
Able to use check fixtures/gauges
Able to load coils of raw material
Able to set straighteners & feeders
Understanding of cam settings and die protection a plus+
Ability to lift up to 30 lbs., stand, pull and bend
High school diploma/GED preferred, not Mandatory
Prescreen testing is required

If interested please send a resume to: amherst@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Welder Fabricator]]> Erie county, Ohio based company has an immediate opening for a Welder/Fabricator

$16.00 - 18.00Hour, depending on experience
Hours: 1st shift Monday Friday 7:00am 3:30pm
Temp-to-Hire potential

Duties include:
Perform welding duties using a wire welder
Weld steel components with welding equipment as specified by layouts
Set up to fabricate parts
Operate forklift, hoists, hand power tools, slings, grinders and cutting torch
Inspect and correct welds to meet specifications
Willingness to cross-train
Inspect equipment
Perform a variety of complicated tasks

Requirements include:
Familiar with a variety of welder concepts, practices, and procedures
Ability to understand welding symbols and diagrams, read prints
Familiar with welding equipment such as torches, torch tips, filler rods, flux, hoses, valves, and gas cylinders
Able to work independently
Must have a strong work ethic
Understanding of machine shop operations
Able to lift up to 50 pounds
Prescreen testing required
HS/GED required

If interested please send a resume to: amherst@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Receiving]]> Strongsville, OH warehouse seeking Receiving Associates for second and third shifts . 

Founded in 1954, our client has become one of the leaders in light manufacturing. A locally owned  company founded on hard work and dedication needs workers willing to go the extra mile. Everyone works together, empowered as individuals and team players to contribute to the culture of continuous innovation and improvement. We need Receiving Associate who are looking to start a career with a growing company!

Opportunities:

  • $10.00/hour plus shift premium. Increase at hire.
  • 1st, 2nd, 3rd shift Monday-Friday
  • OT is available

Key Responsibilities:

         Using Forklift/ Lift Truck/ Pallet Jack to load and unload a truck

         Stock Merchandise

         Using RF scan gun to pick and pack orders

         Physical position requires a lot of strength

Qualifications:

  • Must have a high school diploma or equivalent
  • Must work well in a team environment and have strong communication skills
  • Must have good job performance and attendance records
  • Willingness to work at a fast pace
  • Warehouse background is preferred, but retail, fast food or cart attendants welcome.

Benefits:

  • World Class Staff
  • Friendly culture
  • Medical, RX, Dental, Vision Benefits available (options available)
  • Preventive services immunization and routine health screenings
  • Referral Bonus
  • Weekly Pay

Keywords: Warehouse, Stocker, Stock Clerk, Receiver, Food Service, Shipping and Receiving

If interested please send a resume to: Brunswick@trnstaffing.com

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Welder]]> Berea, OH manufacturer seeks a full time Welder

         First shift Pay $16 - $19 depending on experience.

         Temp to hire for the right candidate.

Duties Include:

         Welding sheet metal.

         Finish a clean weld, keep cool temperature and hand-fit corner to corner welds.

         Maintain good housekeeping by keeping tools, material and equipment in proper place.

Requirements Include:

         TIG and MIG Welding is required.

         Good understanding of blue prints and weld joint designs.

         Mechanical aptitude.

         Strong Assembly background.

         Ability to read a tape measure and calipers.

         High School Diploma or equivalent.

         Basic math skills.

 

If interested please send a resume to: brunswick@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[SMT Operator]]> Perry, Ohio manufacturer seeking 2nd shift Surface Mount Technology (SMT) Machine Operator 

  •  Pay is $10.90/hr.
  • 2nd shift hours are 2:30pm - 11:00pm, Monday thru Friday. 

Duties include:

 

  • Surface Mount Technology Machine Operator

Requirements include:

 

  • Good finger dexterity
  • Standing entire shift
  • Read, understand and comply with work procedures and work instructions
  • Must be mechanically inclined
  • Previous machine operator experience preferred
  • Good concentration and attention to detail required
  • Perfect attendance and reliability a must
  • Pre-employment testing required

If interested please send a resume to: mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Production Worker]]> Our customer in Solon, Ohio, is a leading supplier of coil bobbins, knobs and precision engineered plastic components to the global electrical and electronics industries. They are looking for a Production Equipment Technician to join their team.

  • 1st shift
  • $14-16/hour; depends upon experience

Basic Job Function:

Perform duties within the production department where the primary function is to set-up and provide process support for all production equipment. These responsibilities include but not limited to, Molding Machines, Terminal Assembly Machines and Knob Equipment.

Required Skills:

  • Mechanical aptitude
  • Basic math skills
  • Good attendance
  • Good vision
  • Ability to use hand tools (standard wrenches, screw drivers, etc.)

Work performed:

  • Prepare terminal assembly machines for production
  • Remove and clean machine components and dies
  • Install new components and dies
  • Evaluate new tooling for production compatibility
  • Ensure that machine operators understand production requirements and operation
  • Obtain the molded parts and wire stock required for secondary operations
  • Update the parts and wire inventory in the computer database
  • Perform preventative maintenance, troubleshoot and repair equipment
  • Accurately complete all appropriate documents
  • Perform up to 3 set-ups per shift
  • Perform other related tasks as assigned

Employee relations:

  • Works independently with very minimal supervision
  • Must establish a working rapport with other employees in the Production Department
  • Must be able to interact with the Scheduling Department, QC Department, Shipping, Engineering, and Maintenance Department

Equipment:

Routine care and operation of equipment such as molding machines, dies, molds, gauges, die temp controllers and hand tools

Experience: Two (2) years related experience and training

Education: High School Diploma

If interested please send a resume to: hlim@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Quality Technician]]> Mentor area manufacturer looking for 1st Quality Technician.

1st shift, 7AM-5:30PM Monday through Thursday and OT on Fridays
Up to $13-15/hour, based on experience
Temp to hire with great company!!
Clean, climate controlled environment!

Duties include:

Check parts with proper gauges, micrometers, etc.

Requirements include:

Must be able to check parts with proper gauges, micrometers, etc.
Aerospace part experience and CMM experience a plus!
Must be able to check first piece approval and final approval

Benefits upon permanent hire:

Paid vacations
401K with match
Medical
Dental
Career advancement

If interested please send a resume to: mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machinist]]>

Berea, OH manufacturer seeks a full time Machinist

         Pay $17-$19/hr.

         First Shift

Duties:

         Compute dimensions and tolerances.

         Determine machining operations to be preformed.

         Measure and lay out work pieces.

         Plan the best sequence of operations.

         Set up, operate and maintain machine tools.

         Verify dimensions of products.

         Maintain good housekeeping by keeping tools, materials and equipment in proper place.

 

Requirements:

         High School Diploma or GED

         Completed coursework and or apprenticeship in Machining.

         3-5 years of manual mill and lathe experience.

         3-5 years sheet metal shop experience.

         Good manual dexterity.

         Attention to detail.

         Ability to read and interpret blueprint and engineering drawings.

         Ability to effectively solve problems.

If interested please send a resume to: brunswick@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Brake Press]]>

Berea, OH manufacturer seeks a full time Punch Press Operator

         Pay $14-$17/hr.

         First Shift

Duties:

         Selecting correct tooling (dies, punches, fixtures) and material for the job task according to shop packets and drawings.

         Setting up tooling, fixtures and the punch press to work instructions, shop packets or other released documentation.

         Performing in-line inspection of parts to ensure press repeatability.

         Adjusting parameters to ensure part dimensional compliance in accordance with work instructions, shop packets or other released documentation.

         Performing tear-down of set-up s and proper storage of tools, fixtures, and dies etc.

         Verifying dimensions of products.

         Maintain good housekeeping by keeping tools, material and equipment in proper place.

Requirements:

         High School Diploma or GED

         Previous experience in Manufacturing/Metal Fabrication/Metal Stamping.

         Experience working on a Pega and King Punch press is a Plus.

         Blue Print reading knowledge.

         Micrometer/Caliper measuring tool experience.

         Perform setup of punch press machines ranging from 27-170 ton.

         Load coils, stock material and set straighteners and feeds.

 

If interested please send a resume to: brunswick@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Lab Technician]]> Huron, Oh company has an immediate opening for a Certified Laboratory Technician

$15.00/hour
Hours: Monday-Friday, 6:00am-2:30pm
Temp-to-hire potential

Duties include:
Performs dynamic and static tests in accordance with government regulations, regulatory body specifications and manufacturing requirements. Dynamic tests are performed using free falling impact probes, accelerometers, load cells, displacement transducers and PC based data acquisition systems.
Repairs electrical, mechanical, electromechanical equipment for conformance to established standards, and assists in formulating testing and work standards.

Responsibilities include:
Plans sequence of testing and certification procedures for instruments (crash test dummies) and equipment.
Sets up standard and special purpose laboratory equipment to test, evaluate, and certify other instruments and test equipment.
Disassembles instruments and equipment and inspects components for defects.
Measures parts for conformity with specifications.
Aligns, repairs, replaces, and balances component parts.
Reassembles and certifies instruments and equipment.
Assists engineers in formulating test, calibration, repair, and evaluation plans and procedures to maintain precision accuracy of measuring, recording, and indicating instruments and equipment.

Qualifications:
One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.

If interested please send resume to: amherst@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Press Operator]]> Berea, OH Company seeking Punch Press Operator

         Pay: $11-$13 depending on experience

         First Shift

         Temp-to-hire for right candidate

 

Duties Include:

         Setup and operation of the metal punch press to meet the production goal

         Selecting correct tooling (dies, punches, fixtures) and material for the job task according to shop packets and drawings.

         Setting up the tooling, fixtures and the punch press to Work Instructions, shop packets or other released documentation.

         Performing in-line inspection of parts to ensure press repeatability.

         Adjusting parameters to ensure part dimensional compliance in accordance with Work Instructions, shop packets or other released documentation.

 

Requirements Include

         Ability to read blueprints

         Previous experience in Manufacturing/Metal Fabrication/Metal Stamping

         Pre-screening testing required

         Experience working on a Pega and King punch press is a plus

         Perform setup of punch press machines ranging from 27-170 ton.

 

If interested please send resume to: brunswick@TRNstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Receiving Clerk]]> McDonough, Ga company seeks Receiving clerk.

Pay $12/hr.

2nd Shift t, 3pm-11pm. Monday-Friday with some weekends

 3rd shift 11pm-7am Sunday -Thursday with some weekends



Duties include:

Verify and maintain records on incoming and outgoing shipments.

Prepare items for shipment.

Assemble, address, stamp and ship merchandise or material.

Receive, unpack, verify and record incoming merchandise or material.

Arrange for the transportation of products.

Examine contents and compare with records to verify accuracy of incoming or outgoing shipment.

Prepare documents, such as work orders, bills of lading and shipping orders to route materials.

Determine shipping method for materials, using knowledge of shipping procedures, routes and rates.

Deliver or route materials to departments, using work devices, such as handtruck, conveyor or sorting bins.

Pack, seal, label and affix postage to prepare materials for shipping, using work devices such as hand tools, power tools and a postage meter.

Confer and correspond with establishment representatives to rectify problems, such as damages, shortages and nonconformance to specifications.

Store shipping materials and supplies to maintain inventory of stock.

Contact carrier representative to make arrangements and to issue instructions for shipping and delivery of materials.



Requirements include:

Excellent time management skills.

Strong decision making skills.

Knowledge of raw materials, production processes, quality control, costs and other techniques for maximizing the effective manufacture and distribution of goods.

Knowledge of enterprise application integration software and enterprise resource planning software a plus.

Experience with label making software a plus.

Experience with Microsoft Excel and word.

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machine Assembly]]> Berea, OH Company Seeking Machine Assembler

         Pay: $11-$13/hr

         Monday through Friday 6A-2:30P

         Temporary assignment that could go long term

 

Duties Include:

         Assemble parts for mechanical machine equipment

         Position and fasten units to assemblies and sub-assemblies

         Inspect and test completed units. Attach name plates to assemblies

         Read and interpret instructions, schematics, blueprints, and drawings

         Inspect parts for flaws and imperfections

         Measure dimensions/clearance of parts

         Test for mechanical reliability

         Other duties as assigned

 

Requirements Include:

         1-2 years' experience in machine assembly building/manufacturing environment

         Experience with micrometers, calipers, and/or height gauges

         Ability to work with computers, machines and motion-control assembly

         Ability to read and understand assembly and part drawings, schematics and manuals

         High School Diploma (or equivalent)

         Pre-screening testing required

 

If interested please submit a resume to: Brunswick@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Industrial Electrician]]> Akron client has an immediate need for an Industrial Electrician. This is a direct-hire opportunity with a great organization!

Hours are 7am-4pm, M-F;

Salary is $20-25 an hour (based upon experience) with full compensation & benefits package.


Responsibilities:


Troubleshoot electrical circuits, power distribution, and controls hardware; perform work for Engineering, Maintenance and IT departments.
Procuring electrical fittings, wire, hangers and hardware for capital project installations as well as plant maintenance repairs.
Bend and run EMT and rigid conduit; must be able to pull and terminate wiring for power, controls and communications.
Document and track changes to electrical drawings.
Work with Engineering or Supervisor to produce As Built Drawings at the completion of capital projects.
Assist project engineers and others as assigned to test new systems during start-up.
Hands-on problem-solving, analysis, troubleshooting, and maintenance that will improve reliability, productivity, and decrease downtime on existing or new equipment.
Support maintenance function on an as needed basis,
Perform other duties, from time to time, as required by supervisor.


Requirements:
Education & Experience: Journeyman Certification and/or formal training strongly preferred; minimum 5 years of Industrial Electrician experience strongly preferred.
Communications: Good verbal/written communication skills, interpersonal skills, and the ability to work effectively within a team environment.
Leadership: The ability to take direction and to carry out instructions from the supervisor in an orderly and efficient manner. Must lead by example and display a strong work ethic for others to follow.
Work Style: Possess strong problem solving and troubleshooting skills.

If you are interested in this position, please send resume to hlim@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[CNC Machinist]]> Huron, Oh company has an immediate need for a CNC machinist.

$16.00+/hour
Hours: 3rd Shift 10:00pm 6:30am Mon-Fri
Temp-to-hire potential

Duties include:
Build and assist in the assembly of mechanical components
Responsible for the development of tools and fixtures as needed for production purposes
Set up and operate CNC metalworking machine tools such as lathe or milling machine to machine parts to specifications, and verifies conformance of parts to specifications
Analyze written specifications, drawings, rough sketches, and verbal instructions to plan layout and determine sequence of operations
Set up and operate machines, including adjusting speeds and feeds, and the use of proper tooling and fixtures
Perform preventive maintenance on machines as required part of PM schedule or calendar
Effectively and safely operate multiple machines at same time
Consult with engineer and other personnel regarding product information such as design, capacity and purpose, and types of material to be used to fabricate product
Other duties as assigned

Requirements include:
3 years related experience and/or training.
Ability to edit programs, change offsets and reduce set up time
Ability to read and interpret blue prints
Ability to read and edit programs.
Use full range of precision measuring and gauging tools to determine acceptability of part
Associate's degree or equivalent from two-year college or trade school preferred
Advanced math such as trigonometry preferred
Prescreen testing required


If interested please send resume to: amherst@trnstaffing.com 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Lumper]]> Columbus, Ohio west side facility seeks a full time warehouse associate.

 

         2nd Shift, Tuesday thru Saturday, 4PM-12AM.

         $11.25/hr.

         Temp to hire w/pay increases

 

Duties include:

 

         Responsible for and/or assists in the material handling and warehousing functions.

         Loading and unloading of trucks.

         Receiving, processing, storing, moving and shipping of materials.

         Dock working and general warehouse/logistics.

 

Requirements:

 

         Must have steel toe boots.

         Ability to use a hand truck dolly.

         Frequent walking, carrying, reaching, standing and stooping.

         Work in environments with frequently changing temperatures.

         Ability to work in fast paced environment.

 

If interested please send resume to columbus@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Lumper]]> Columbus, Ohio west side facility seeks a full time warehouse associate.

 

         2nd Shift, Mon, Wed, Thur, Fri and Sat, 4PM-12AM.

         $11.25/hr.

         Temp to hire w/pay increases

 

Duties include:

 

         Responsible for and/or assists in the material handling and warehousing functions.

         Loading and unloading of trucks.

         Receiving, processing, storing, moving and shipping of materials.

         Dock working and general warehouse/logistics.

 

Requirements:

 

         Must have steel toe boots.

         Ability to use a hand truck dolly.

         Frequent walking, carrying, reaching, standing and stooping.

         Work in environments with frequently changing temperatures.

         Ability to work in fast paced environment.

 

If interested please send resume to columbus@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Picker Packer]]>
The Reserves Network Charlotte, NC, seeking the following skill sets:

Picker/Packer
RF Scanner experience
Loading/Unloading
Pallet jack Operator

What you get in return: In addition to working at an award-winning company with a positive working environment, you receive:
Competitive pay rates
Affordable health plan, including Medical, Prescription, Dental, and Vision
Referral Bonus
Weekly Pay
Growth Opportunities

If interested please send a resume to: charlotte@trnstaffing.com
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Press Operator]]> High volume metal stamping company in  Brookpark, OH is  seeking a 2nd shift experienced press operator to join their team.

2nd Shift position 3:30pm-12:00am

Pay $15-$18 depending on experience.

 

Duties:

Perform Die Setup

Load Coils

Perform minor die adjustments in press

Operate press equipment

 

Requirements:

Minimum 3 years Automatic Coil Fed Press experience is required

Knowledge of SPC and blueprints is needed.

Lift up to 50lbs.

Great attendance and punctuality   

 

If interested please send a resume to: Brunswick@TRNstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[General Labor]]>

Perry area manufacturer seeks General Laborers

  • $12/hr
  • 1st shift 7AM-3:30PM Monday through Friday

Duties include:

 

         General labor and banding steel

         Machine helper, will be trained on equipment

 

Requirements include:

  • Previous factory experience is required because associates will be trained to operate their equipment
  • Pre-employment testing required

If interested please send a resume to: mentor@TRNstaffing.com


]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Account Representative]]> Cleveland, OH Company has an immediate need for several Contract-to-hire Patient Account Rep professionals.

Flexible work hours: 8:30am 5:00pm four days a week, 10:00am 7:00pm one day a week, and 8:00 am noon one Saturday a month. Salary is $12.00-14.00/hour (based upon experience).

Responsibilities include:
Provide the reason for the outstanding debt to customers and offers approved payment options and calculate appropriate payment plans.
100+ emails and calls a day (inbound/outbound).
Process payments over the phone via check by phone, credit card, hard copy or payment database.
Verify Medicaid eligibility as directed by the client.
Determine eligibility of Free Care for hospital charity programs and send out appropriate paperwork.

Requirements include:
Proficient with typing (35+ words a minute).
Familiarity with medical terminology and insurance plans.
Familiarity with AS400, HDX, SMS, HBO, FACS database systems.
Bilingual a plus.


If interested please send a resume to: trnpro@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Maintenance Technician]]> Our customer in Garfield Hts., is looking for a Maintenance Technician. This is a Direct Hire Opportunity!

Pay: $20/hour

Flexible hours: 2nd or 3rd shift, 2 pm to 10pm or 10 pm - 6 am

Requirements

  • Maintenance
  • Mechanical
  • Electrical
  • Welding
  • Boiler

Benefits:


  • Pay Increase to $23 after 1 year
  • Pay Increase to $26 after 2 years
  • 2 year training program
  • No certifications needed
  • Health benefits - Etna & Blue Cross Blue Shield
  • 401K
  • Dental
  • Vision
  • Uniform provided

If you are interested, please send resume to hlim@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[General Labor]]>

Berea, OH Company Seeking General Labor Candidate

         Mon-Fri 6A to 2:30P

         $11/hr

         Long term assignment, possibly temp-to-hire for the right candidate

 

Duties Include:

         Moving racks, pallets, parts.

         Use of hand tools

         Other duties as needed

 

Requirements Include:

         Ability to lift 50 lbs.

         Deburring/Grinding experience required

         Pre-screening testing required

 

If interested please send a resume to: brunswick@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machine Operator]]> West side, high volume metal stamper and tapping 0peration, seeks production Machine Operator to join their first and second shift team.

 

         First shift Monday- Friday  7a-3:30pm

         Second Shift  Monday - Friday  2:30 - 11 PM

         $12/hr

 

Duties Include:

         Operate tapping machine

         May need to make minor machine adjustments

         Other duties as assigned

 

Requirements Include:

         Minimum of 3 years of experience working with repetitive production machines

         Experience in factory/fast paced environment

         Mechanical Aptitude

         Able to lift up to 50lbs

 

If interested please send a resume to: brunswick@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machine Operator]]>

West side, high volume metal stamper and tapping 0peration, seeks production Machine Operator to join their first and second shift team.

 

         First shift Monday- Friday  7a-3:30pm

         Second Shift  Monday - Friday  2:30 - 11 PM

         $12/hr

 

Duties Include:

         Operate tapping machine

         May need to make minor machine adjustments

         Other duties as assigned

 

Requirements Include:

         Minimum of 3 years of experience working with repetitive production machines

         Experience in factory/fast paced environment

         Mechanical Aptitude

         Able to lift up to 50lbs

 

If interested please send a resume to: brunswick@trnstaffing.com

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Assembly]]> Premier Mentor area manufacturer has immediate openings for 2nd and 3rd shift Assemblers

         $12/hr

         2nd shift hours: 2:30PM - 3PM to 10:30PM 11PM

         3rd shift hours: 10:30PM 11PM to 6:30AM 7AM

         Temp to hire with benefits and PTO upon hire

         Clean, climate controlled environment

 

Duties include:  

         Performs assembly work in a station or line to produce medical devises in a FDA regulated and controlled environment

         Uses various hand tools and bench top pneumatic presses

         Handle and evaluate qualify of small parts during manufacturing processes

         Inform Lead Technician of any problems pertaining to production, parts, equipment or processes

         Operate equipment needed to perform job

 

 

Requirements include:

         Diploma or GED

         Strong manual dexterity to work with small parts

         Meet quality assurance requirements

         Promote and provide a safe working environment

         Work in a team environment

 

If interested please send a resume to: mentor@TRNstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[General Labor]]> Painesville Manufacturer has two immediate needs for General Laborers.

Sprays surfaces of foam sheet products with spray adhesive from a pressure pot utilizing a non-toxic, water based product that is used to bond various foam materials together.

         $10/hr to start with increase upon hire

         1st shift 6AM - 2:30PM Monday through Friday

         Mid shift 11:30AM-10PM Monday through Thursday

         Temp to hire, nice environment

Duties include:

General labor in the lamination department
Stage foam sheets for spray application
Pull stock for order fulfillment as needed
Pay close attention to order details and fabrication instructions
Pours coating liquid into spray container and connects gun to air hose
Turns sprayer valves and nozzle to regulate width and pressure of spray
Pulls trigger and directs spray onto work surface to apply adhesive

Requirements include:

 

         Requires good hand / eye coordination

If interested please send a resume to:  mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Mechanical Assembly]]> Mentor, Ohio Manufacturer seeks Assembly Specialist 

$11.00 per hour based on experience
1st shift Monday-Thursday 6am-4:30pm

Duties
:

Perform assembly operations of heaters to specification and work under general leadership in a small team to identify inventory, pull parts, wire, test and assemble components and products.

Requirements:
 

         Electrical assembly and wiring experience is preferred but not required

         Must be able to perform basic math skills and use a ruler

         Must be reliable and detail oriented

         Must have good hand/eye coordination

         Ability to stand for entire shift

         Ability to work in a fast paced environment

         Ability to follow instructions

 


Benefits

 

         Medical, dental, vision, and prescription coverage with a small contribution.

         401(k) with company match.

         Tuition reimbursement.

         Paid-off holidays after 30 days of employment.

         Paid-off floating holidays after 180 of employment.

         Receive 20 hours of PTO at 90 days and 180 days of employment.

         Company paid short-term disability, long-term disability  and life insurances

 

If interested please send a resume to: mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Assembly]]>
$13.50+/Hour
2nd Shift: 2:00pm 10:30pm
Temp-to-hire potential

Duties include:
Assemble quality parts in a timely manner to achieve the production/delivery schedule
Maintain clean and organized work area
Contribute to work instructions as related to this position
Dependability in attendance and completion of assigned duties
Willing and able to work with and assist co-workers, safely
Document accurately and completely in production software
Comply with and support ISO quality system in all activities
Assembly and/or fabricate all products per work instructions, prints, or assembly aids
Weigh & measure parts
Clean and/or polish all finished parts
Record all data as required
Other duties as assigned

Requirements include:
Prior experience with mechanical assembly/disassembly, preferred
Prior experience reading/using blue prints and work instructions, preferred
Ability to work unsupervised to meet schedules and deadlines required
Ability to follow written and verbal instructions required
Mechanical aptitude for small scale assembly
Ability to read prints required
Ability to use scales and weigh accurately required
Basic computer skills required
Attention to detail required
Minimum HS diploma or GED required
Prescreen testing required

If interested please send resume to Amherst@trnstaffing.com
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machinist]]> Erie County Oh based company is seeking a machinist Lathes; Mills; Boring Machines

1st shift Mon-Fri 7:00am 3:30pm
$16.00 - 18.00/Hour depending on experience
Temp to Hire potential

Duties include:
Operate machines, such as lathes, milling centers, Bridgeport mills, sanders, grinders and auxiliary machines
Inspect workpieces for defects
Measure workpieces for quality assurance and accuracy of machine operation, using rules, micrometers, calipers, templates, or other measuring instruments.
Able to read blueprints or job orders to determine product specifications and tooling instructions
Produce parts from company drawings using all machine tools, micrometers and calipers

Requirements include:
Manual machining skill background; 2 years minimum experience
Program and Set-up experience required
Understand how to measure and select tooling
Familiar with Haas turning lathes and/or EZ Trak Bridgeport Proto mills helpful
Able to work independently
Must have a strong work ethic
Understanding of machine shop operations
Able to lift up to 50 pounds
Prescreen testing required
HS/GED required

If interested please send a resume to: amherst@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Administrative Assistant]]>

A Erie Manufacture is seeking an Administrative Assistant

  • Pay: $10.00/hr
  • Shift: First Shift

Responsibilities Include:

  • Answering phones
  • Filing paperwork
  • Calling customers

Requirements Include:

  • Ability to work with Microsoft Office
  • Ability to work on your own, but also take instructions well
  • Familiar with QuickBooks is a plus

If interested please send a resume to: Erie@TRNstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Dispatcher]]> Brook Park, OH Company Seeking Dispatcher

         Pay: $13-$14/hr based on experience

         Monday thru Friday 1pm-9pm or 11pm depending on daily circumstances

         Temp-to-Hire opportunity for the right candidate

Duties Include:

         Processing & keeping up with email / data entry.

         Responsible for routing / guiding drivers and dock personnel throughout the day

         Answering phones and closing/locking building for night.

 

Requirements Include:

         Proficient in Microsoft Outlook & Excel

         Dispatching experience  in the trucking industry, a plus.   

         Must be familiar with Cleveland and Akron areas

 

If interested send a resume to: Brunswick@trnstaffing.com

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Coremaker]]>  Lake County manufacturer seeks 1st Shift Core Maker/Shelling

 

  • $12.50/hr.
  • 1st shift 6am - 2:30pm Monday through Friday
  • Temp to hire with great company!

 

Duties include:

 

  • Produce high quality molds
  • Dipping Molds
  • Maintain slurry and sand beds

Requirements include:

 

         Excellent hand / eye coordination

         Strong attention to detail

         Self motivated and work independently

         Must be able to work in hot enviornment

 

The Reserves Network pays WEEKLY!

 

If interested please send a resume to: mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Tube Bender]]> $11.00/Hour + depending on experience
Hours: 2nd shift 2:30 pm - 11:00 pm; occasional Saturday 12:00 pm - 6:00 pm
Temp-to-Hire potential
Duties include:
Training to perform bending operations using tooling, setting stops, bend angles and twists, perform setup
Weld mild steel
Prepare finished product and move to next department.
Training to read blue prints and learn to inspect parts using required inspection tools
Make required adjustments and offsets
Make decisions on next job in bender, based on setup running or product required
Training to run multiple benders
Requirements include:
1 year prior experience in manufacturing operating manual and/or CNC tube bending equipment
Advanced math skills
Strong analytical thinking abilities;
Able to read blue prints
Strong mechanical aptitude with good problem solving skills.
Knowledge of safety standards and safe guards
Prescreen math and tape measure test
HS diploma/GED

If interested please submit resume to amherst@trnstaffing.com . ]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Utility Helper]]> Perry, Ohio manufacturer seeks 2nd shift Utility Helper

         Pay is $10.90/hr

         2nd shift hours 2:30pm - 11pm, Monday thru Friday

         Clean, climate-controlled environment

Duties Include

         Catch and clean boards

         Stock supplies

         Read, understand and comply with work procedures and work instructions

         Temp to hire opportunity

         Perfect attendance and reliability are critical

         Pre-employment testing required

If interested please send a resume to:  mentor@trnstaffing.com

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Production Operator]]>

Our customer in Seville, OH is looking for hardworking, motivated people to join their first or second shift team.

Duties:

         Production work involving rubber

         Using a calendar machine

         Cutting rubber with a knife

         Using hoists to lift rubber

         Entering information into a computer

 

Requirements:

         Must be able to lift up to 50lbs

         Basic computer skills

         Prior manufacturing experience preferred but not required

         Tow motor skills a plus but not required

 

Benefits:

         Great Work Environment, lunch provided during weekend OT

         Medical, RX, Dental, Vision Options available

         $12-$15/hour, paid weekly

         Referral Bonus

         Direct Deposit Options

 

If interested please send a resume to: brunswick@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Customer Service]]> An accomplished Customer Service/Vendor Management Representative is needed for a Title Insurance company located in Independence, OH.

         1st shift position, 8am-5pm

         $12.00-$15.00/hr

 

Duties Include:

         Order entry

         Vendor management

         Assisting the Director of Settlement Services

         Process orders in accordance with specific client requirements

         Build and maintain relationships with vendors

         Monitor turn around time for title commitment completion

         Prepare Closing Protection Letters

         Order Tax certifications

         Responsible for final delivery of commitment package

         Order quotes

         Provide backup to other team members when order flow demands a shift in priorities

 

Requirements Include:

         3 years of title insurance, mortgage servicing, vendor management experience is preferred

         Attention to detail, time management and organizational skills required

         Strong communication skills, both written and verbal

         Bachelor degree or equivalent work experience preferred

If interested, please send resumes to: Lakewood@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Administrative Assistant]]> Our client has an immediate need for an Escrow Assistant.

 

Hours are 8-5, M-F

 

Salary is $15-20 an hour

 

Responsibilities:

  • Deliver a completed commitment package to the client.
  • Coordinate with the Escrow Officer to ensure all documentation has been executed and funding is received in time for disbursement.
  • Process signed documentation to ensure timely document recording.
  • Communicate closing information and dates to transaction parties.
  • Arrange appointments for notary or attorney to perform closing.
  • Order and update payoff statements.
  • Handle post-closing issues.
  • Prepare loan package for return to client.
  • Prepare documents for closing and handle the complete disbursement and follow up of all escrow transactions.
  • Communicate requirements and other information to clients, including title exceptions.
  • Interpret earnest money agreements as they relate to closing, and prepare all documents. required for transactions.
  • Assist with funding, recording of documents, and title clearance.

Requirements:

  • Demonstrated knowledge of title, escrow, and closing practices.
  • 2 years in front to back experience as an Escrow Assistant.
  • Strong communication skills, both written and verbal.
  • Strong customer service skills, work ethic, and a positive attitude.
  • A self-starter, capable of working independently with a strong ability to multi-task.
  • Ability to work in a fast-paced environment, prioritizing time-sensitive matters.

Compensation & Benefits:

  • Positions offer competitive salary.
  • Company sponsored health insurance plan.
  • Company sponsored dental/vision plan.
  • Company sponsored 401(k) with match.

If interested please send a resume to: wcolbert@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Electric Assembler]]>  

 

Berea, OH Company Seeking Electric Assembler

         Monday thru Friday 6am-2:30pm

         Temp-to-hire opportunity for the right candidate

 

Duties Include:

         Assemble parts for electro-mechanical equipment.

         Position and fasten units to assemblies and sub-assemblies.

         Inspect and test completed units. Attach name plates to assemblies.

         Read and interpret instructions, schematics, blueprints, and drawings.

         Inspect parts for flaws and imperfections.

         Measure dimensions/clearance of parts.

         Test for mechanical reliability.

         Other duties as assigned.

 

Requirements include:

         High School Diploma (or equivalent)

         1-2 years' experience in an electro-mechanical manufacturing environment

         Experience with micrometers, calipers, and/or height gauges.

         Ability to read and understand assembly and part drawings, schematics and manuals. 

         Ability to work with computers, machines and motion-control assembly.

         Ability to work with hands, whether directly manipulating components or using controls on a machine.

         Ability to identify different colored wires, tabs and electronic components.

         Ability to lift 50 lbs

         Pre-screening testing required

 

If interested please submit a resume to: Brunswick@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Assembly]]>

Mentor, Oh Manufacturer is in need of Assemblers

 

         $9.00

           Shift hours are 7am-3:30pm Monday through Friday

         Clean environment and potential for permanent hire!

         Reserves Network pays weekly!!

 

Requirements include:

 

        Requires 6 months continuous manufacturing experience

        Requires standing for duration of shift

        Hand assembly of parts as well as utilizing small hand tools to rivet panels together

        Ability to work quickly, work from instructions, and good attendance a must

        Prior factory or assembly experience desired

 

If interested please send a resume to: mentor@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Shipping Clerk]]> Mentor, Ohio Manufacturer seeks Shipping Clerk

11.50 per hour based on experience
1st shift Monday-Friday 8:30am-5pm

Duties:

Shipping clerk who will be taught to build boxes, safely pack and ship products, operate a forklift, perform visual inspections and verify information on invoices, orders and other records.

Requirements:

 

         Shipping or receiving experience is preferred but not required

         Ability  to read, count accurately, perform simple math and write legibly

         Must be dependable, detail oriented, work independently and as a team player

         Ability to follow work instructions

         Minimum of 1 year experience or equivalent in woodworking

 

Benefits:

 

  • Medical, dental, vision, and prescription coverage with a small contribution.
  • 401(k) with company match.
  • Tuition reimbursement.
  • Paid-off holidays after 30 days of employment.
  • Paid-off floating holidays after 180 of employment.
  • Receive 20 hours of PTO at 90 days and 180 days of employment.
  • Company paid short-term disability, long-term disability, and life insurances

 

If interested please send a resume to: mentor@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Welder]]>  

State of the art manufacturing facility and leader in supplying commercial equipment by producing products that are innovate in design and quality.  We are currently  searching for experienced Welder/Fabricators.  The company attributes their tremendous success to innovation, design, quality of construction and excellent customer service.   

 

 TIG Welder/Fabricators to work in their facility near Jackson, Georgia offering a 1st  shift opening.

 

TIGWelder/Fabricator Responsibilities

  • Set up welding machines based using a Welding procedure specification
  • Read and interpret blueprints and/or drawings to determine the specific welding requirements
  • Weld and fabricate components based on the specifications of blueprints and/or drawings
  • Welder/Fabricator ensure work is done safely and meets quality standards.
  • Provide a great level of attention to detail and focus on the given task.
  • Uphold OSHA standards applicable to the responsibilities above.
  • Assist in maintaining a clean, organized warehouse environment at all times

Required Skills/Qualifications

         5-8 years of welding with graduation from Welding curriculum in high school or technical school. 

        Ability to identify and measure material to produce quality products consistently

        Ability to follow instructions given both verbally and in written form

        Performs repair/new fabrication read blueprints, drawings, calipers, tape measures and angle gauges

        Performs prototype work to plan and devise different methods to increase production/ease production

        Ability to stand continuously for long periods of time

       Ability to pass pre-screening process

Benefits

         Immediate 1st shift opening

         Medical Benefits; Dental, Vision

         Referral Bonus

         Weekly pay

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Electronic Assembly]]> Lake County based company seeks Electronic Assemblers:

  • $9/hr. to start
  • 1st shift positions, Monday thru Thursday from 5AM-3:20PM
  • Clean, climate controlled environment
  • Temp to hire with increase upon hire

Requirements include:

  • Pre-employment screening is required
  • Electronic assembly work

If interested please send a resume to:  mentor@trnstaffing.com 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Sandblaster]]> Mentor manufacturer seeks light industrial associate:

 

         $9.50/hr

         1st shift 7:30AM -4PM Monday through Friday

         Temp to hire!

 

 

Duties include:

 

         Sand blast and prime parts

         Place parts on rack for the operator to complete next process

         May also trim parts and be cross trained in other areas

 

Requirements include:

 

         Previous manufacturing experience preferred

         Perfect attendance and reliability a must

 

 Reserves Network Pays Weekly!

 

If interested please send a resume to:  mentor@trnstaffing.com

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Material Handler]]>  

Forest Park, large sheet metal fabrication shop looking for trim workers.

 

  • 6am-6pm Mon- Friday
  • some saturday
  • Temp to hire

 

  • Hard workers
  • Steel toe boots
  • Knee pads
  • Able to do 12 hour shifts 
  • Working in the heat
  • Able to stoop and bend all day
  • Construction background would be a plus

 

 

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Cold Header Setup]]> Euclid area machine shop seeks Cold Header (setup and operate) on 1st or 2nd shift

  • $20-$21/hr based on experience
  • 1st shift 6:30AM - 5PM Monday thru Thursday
  • Permanent opportunity

Requirements include:

  • Three years experience preferably on National Acme Formax Machine
  • Set up and operate one or more Headers / Boltmakers
  • Read blueprints and job routings
  • Use of gages and measuring instruments
  • Determine and locate required tooling to manufacture part
  • Install and adjust all tooling to produce part per specification
  • Tear down setup after job is complete

If interested please send a resume to: mentor@trnstaffing.com


]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Auto Body Prep]]> Orlando Company seeks Large Vehicle Painters and Body workers

         1st Shift, 6am- 430pm, Mon - Thursday , plus overtime available!

         $15.50-$16 per hour, DOE

 

Duties Include:

         Use Sander, grinder and other hand tools

         Responsible for Safety

         Mix and Spray paint on to vehicles

         Prep and Body Work, tape, buffing

Requirements Include:

         High School Diploma or GED

         Minimum 3 years large vehicle painting experience

         Detail oriented

         Able to use Tape Measure and Hand Tools

         Must pass client pre-screening process

         Able to lift up to 40 lbs, squat, stand, reach, etc.

         Knowledge of Single Stage Paint Process a plus

Amazing benefits when  hired by the customer, including medical, dental, 401k, vacation, etc.

If interested please send a resume to: winterpark@trnstaffing.com

and then call us today at 407.774.7770

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Maintenance Mechanic]]>
Responsibilities and duties:

Perform machine, equipment and building maintenance
Layout, install, modify, troubleshoot, adjust, repair and maintain
Material handling activities- crating, packing, shipping, receiving, picking, lifting, moving and using material handling equipment - lifts, trucks, tow motors, cranes, high lifts, etc.
Utilize small and large tools - hoists, dollies, etc.
Maintain quality assurance policy consistent with ISO standards
Maintain work area in a clean, orderly and safe manner
Perform all other job-related duties as assigned

Required experience:

Minimum 5-7 years
HVAC and CNC machine repair
Electrical concepts and usage
Mechanical concepts and useage
Ability to use power and hand tools
Ability to use testing instruments
Ability to read and interpret blueprints and technical specifications
Ability to handle non-routine, standard projects and tasks
Ability to interact and communicate with all levels of employees, suppliers and customers

*Required Education:

Minimum 1 year technical or college level training

Physical and Technical Environment:

Regularly lift up to 50 lbs.
Occasionally lift or move up to 100 lbs.
Ability to sit, stand, walk, reach with hands and arms, bend and stoop
Ability to travel throughout multi-floor office and shop area
Ability to walk, climb stairs, use elevator
Some exposure to electrical and mechanical hazards
Overtime required periodically to meet deadlines
Exposure to noise, dust, heat, and cold on a regular basis

Benefits: Kick in after 30 days!

Medical
Dental
Vision
401k
Life
Short and long term disability
Tuition reimbursement

If interested in this position, please send resume to hlim@trnstaffing.com ]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Box Builder]]> Perry, Ohio manufacturer seeks 1st Shift Box Build

 

  • 1st shift 6AM - 2:30PM
  • $10.50/Hr
  • Temp to Hire! Clean, climate controlled environment

 

Duties Include

 

  • Mechanical assembly 
  • Testing completed units
  • Some cable/wire cutting, stripping and terminating

 

Requirements include:

 

  • Must have good manual dexterity
  • Possible to lift up to 50 lbs periodically throughout shift
  • Ability to use hand tools to work in box build area
  • Requires high energy to work at a fast but accurate pace
  • Mechanical assembly ability
  • Read, understand and comply with ISO procedures and work instructions
  • Temp to hire opportunity

If interested please send resume to:  Mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Packaging]]> Perry, Ohio manufacturer seeks 1st shift Packing

 

  • 1st shift 7AM-3:30PM
  • $10.50/Hr
  • Temp to Hire! Clean, climate controlled environment

 

Duties Include

 

  • Responsible for packing product
  • Verify counts
  • Lifting 1lb to 50lbs regularly throughout the day

 

Requirements include:

 

  • Must have good manual dexterity
  • Ability to use hand tools to work in box build area
  • Requires high energy to work at a fast but accurate pace
  • Mechanical assembly ability
  • Read, understand and comply with ISO procedures and work instructions
  • Temp to hire opportunity

If interested please send a resume to:  Mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Inspector]]> Mentor area manufacturer has an immediate need for a 1st, 2nd &3rd shift Quality Inspector

  • 1st shift hours 6am-2pm / 2nd shift hours 2pm-10pm / 3rd shift hours 10pm-6am
  • $14hr and up based on experience

Duties include:

  • Visual inspection of incoming product
  • In-process, first piece, last piece, final and incoming dimensional inspection

Requirements include:

 

  • Must have 1-3 years of experience
  • Knowlege of micrometers & calipers a must
  • Pre-employment screening required
  • Great environment, temp to hire!

If interested please send a resume to: mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[CNC Machinist]]> Mentor area manufacturer looking for 2nd shift and 3rd shift CNC Machinists

  • 2nd shift hours 2pm 10pm / 3rd shift hours 10pm 6am
  • $16.50 hour
  • Temp to hire with great company!

Duties include:

 

         Study specifications or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. 

         Setup, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines such as CNC mills and lathes to very tight tolerances, sometimes to within .0001.

         Inspects machined parts to verify conformance of finished work piece to specifications. 

         Confers with production personnel or others to resolve machining problems.

         Sets up and operates metalworking machine tools such as lathes and mills to machine parts to critical specifications, and verify conformance of parts to specifications.

 

 

 Requirements include:

 

  • High School Diploma or GED
  • Two years CNC machine experience is required
  • Fundamental mathematical skills
  • Experience with standard inspection equipment and tools
  • Pre-screening testing is required

 

If Interested please send a resume to:  Mentor@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Quality Inspector]]> Jackson, Ga looking for a QC

 

  • First shift
  • 7am-3:30 pm

 

  • Must have experience in quality control
  • Detail focus
  • Able to read tape measure, micrometers and vernier's (calipers)

 

  • Hot environment
  • Stand for long period of times
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Customer Service]]>  Perry, Ohio manufacturer seeks Customer Service Representative 

 

  • $12-15/hr., commensurate with experience  
  • Temp assignment expected to last 4-5 months

 Duties include:

 

  • Ability to handle complex, multiple customer accounts
  • Receive and process purchase orders verifying for accuracy per quotation
  • Maintain sales orders through order procedure
  • Communicate purchase order or delivery problems with customers
  • Provide timely resolution to sales order and customer related issues
  • Maintain master production schedule through MRP system
  • Enter customer forecast in MRP master schedule 

 

Requirements include:

 

  • Requires strong Excel and Word skills
  • Previous Customer Service experience preferably for a manufacturing company

 

If interested please send resume to: mentor@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Quality Technician]]> Griffin, Ga looking for a quality technician

 

  • Second shift 3pm-12 midnight
  • Train on first 7am-4pm for 3-4 weeks
  • Temp to hire

 

GENERAL DUTIES AND RESPONSIBILITIES:

         While performing any procedure, all associates must observe applicable Safety, Health, and Environmental rules and guidelines. The use of appropriate personal protective equipment is required.

         Attend and participate in training opportunities and seminars relevant to this position.

      Adhere to appropriate operating procedures, benefit rules, employment, and safety policies/practices.

 

ESSENTIAL DUTIES AND RESPONSIBILITIES :

  • Ensure personal compliance with corporate, plant safety standards and job specific safety standards.
  • Apply statistical tools and techniques to monitor plant performance and finished goods.
  • Complete laboratory testing with testing equipment and collect samples at established intervals.
  • Handle small scale laminator and high pressure cooker to demonstrate the performance check of finished goods.
  • Continually seek process improvements and make recommendations to management.
  • Audit for compliance to control plan requirements including process parameters.
  • Complete dimensional checks and report on product.
  • Communicate quality issues and out of specifications conditions to appropriate personnel and with shift leaders.

 

JOB SCOPE

 

         Job has recurring work situations involving moderate degrees of discretion.  The need for accuracy and effective utilization of accepted programs and procedures is high.  Errors in judgment and execution will waste time and resources adversely impacting unit performance.  Incumbent operates independently but work is verified by supervision.

 

COMPETENCIES/SPECIFIC EXPERIENCE OR TRAINING PREFERRED:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

 

Education and Experience

         Requires an Associate s degree; or equivalent combination of education and experience.

         T hree years of related experience.

 

Knowledge, Skills and Abilities

  • ASQ certification or equivalent preferred
  • Knowledge of safe work practices
  • Influencing skills
  • Knowledge of basic statistics
  • Metrology skills including calibration
  • Able to manage multiple priorities & meet deadlines
  • Good computer skills
  • Uses logical approach to problem solving  in Production & Continuous Improvement
  • Understands the role of Quality in a manufacturing organization and a Quality Operating System

 

JOB CONDITIONS:

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job the associate is:

         Frequently required to perform administrative and professional work using writing tools and electronic media

         Required to be ambulatory to move around freely between buildings, and between levels within buildings

         Occasionally lift and/or move up to 30 pounds

         While performing the duties of this job, the associate may be occasionally exposed to fumes or airborne particles and toxic or caustic chemicals associated with plant or office work

         Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus

         The noise level in the work environment is usually low

 

 

 

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machine Operator]]> Elizabethtown , Kentucky company seeking Entry Level Machine Operator
2nd Shift, Monday thru Friday -This position will train on first shift
$10/hr.
Duties Include:
Heavy lifting
Working in a hot environment for a prolonged period of time
Operate grinding equipment
Monitor equipment operation to ensure proper functioning.
Quality checks on parts during assembly
Requirements include: Must be able to utilize standard measurements to perform changes
Able to lift up to 50lbs
Steel-toed safety shoes

<If interested please send a resume to: elizabethtown@trnstaffing.com>

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Press Brake Operator]]> Company in Streestboro, Oh is seeking a Press Brake Operator Class I.
 1st Shift Monday thru Friday
 $13-$16/hr


Duties include:
 Operate computer controlled press brake machine to produce formed parts for additional manufacturing operations or sold as is .
 Reads production paperwork to determine specified requirements to manufacture.

Requirements include:
 Has the ability to check parts utilizing calipers, micrometers and height gages to guarantee conformity to print specifications.
 Reviews parts for conformity to workmanship standards.
 Fills out production paperwork including quality and timekeeping records.
 Fills out production paperwork including quality and timekeeping records.
 Monitors the calibration of the equipment they use with in their department.
 Follows written/verbal work instructions that they have been trained on.
 Other duties as directed.
 High School Diploma or GED

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[LASER CUTTING WELD]]> West Jefferson, Ohio company seeks a Laser Cutter Welder.

 

         3rd Shift, Monday thru Friday, 10PM-6:30AM.

         $12.30/hr.

         Temp to hire.

 

Duties include:

 

         Setting up machine, or tending machines to laser, cut, punch, bend or straighten metal.

         Running machines, loading and setting up, making adjustments.

         Examine work for defects and sort defective parts.

         Assembly production for manufacturing.

 

Requirements include:

 

         Ability to lift up to 35 lbs.

         Must have steel toe boots.

         Ability to stand for prolonged periods.

 

If interested please send resume to coumbus@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Packer]]>
Responsibilities to include:
Assembly line of baked goods
Applying frosting to baked items
Placing bakery items in trays and sealing with a lid
Applying labels to the trays, package into a box and labeling box for shipment
Performs production line tasks as directed by supervisor
Maintains cleanliness of work area
Maintain documentation with a high degree of accuracy and quality

Job Requirements:
Ability to stand for a minimum of 10 hours on a daily basis
Must be able to work 1st or 3rd shifts
Must have High School Diploma, GED
Previous work in assembly preferred

Benefits:
Long term temporary/Opportunity for Temp-to-Hire
Friendly culture working at a positive working environment
4 day work week Monday Thursday
Referral Bonus
Weekly Pay

Pay for this position is $9.00 per hour

If interested please send a resume to: matteson@TRNstaffing.com


]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Lumper]]> Columbus, Ohio west side facility seeks a full time warehouse associate.

 

         3rd Shift, Tuesday thru Saturday, 12AM-8AM

         $11.50/hr.

         Temp to hire w/pay increases

 

Duties include:

 

         Responsible for and/or assists in the material handling and warehousing functions.

         Loading and unloading of trucks.

         Receiving, processing, storing, moving and shipping of materials.

         Dock working and general warehouse/logistics.

 

Requirements:

 

         Must have steel toe boots.

         Ability to use a hand truck dolly.

         Frequent walking, carrying, reaching, standing and stooping.

         Work in environments with frequently changing temperatures.

         Ability to work in fast paced environment.

 

If interested please send resume to columbus@trnstaffing.com

 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Machine Operator]]> McDonough, ga looking for a Machine operator

 

  • 6am- finish 12 hour shifts
  • Rotate days off
  • Temp to hire

 

  • Fast pace production
  • Running plastic roll machine
  • Standing for 12 hours

 

  • Good Benefits
  • paid time off
  • paid holiday
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Picker]]>
1st shift, Mon, Wed, Fri and Sat, 6:30AM-finish.
$10/hr.
Long term position.

Duties include:

Picking and Packing.
Stacking and unstacking bread trays.
Prepping merchandise for shipment.
Inspecting merchandise for quality assurance.

Requirements include:

Ability to lift up to 30 lbs.
Must be able to stand for long periods of time.
Ability to work in a fast paced environment.
Requires frequent walking, reaching, standing and stooping.

If interested please send resumes to columbus@trnstaffing.com
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[General Labor]]>

Duties and Responsibilities
Handling of all inbound and outbound goods and materials of the warehouse.
Tagging, labeling, and stocking of all supplies of the warehouse.
Efficiently completing all activities delegated by the warehouse Supervisor.
Loading and unloading .
Maintaining tidiness and cleanliness standards of the warehouse.
Organizing the stocking and proper storage of goods and materials.
Coordinating all work functions with co-workers, transporters and other organizational departments.
Maintaining cycle count of all warehouse inventories and reporting discrepancies to the supervising manager.
Skills and Specifications
Should have the ability to lift heavy materials.
Should have the ability to competently and effectively manage time and complete assigned work.
Should be a team player and have the ability to coordinate with fellow workers.


Closed toed shoes. No rips or tears in clothing. No profanities on T-shirt. Safety vest required
If interested please send a resume to: savannah@TRNstaffing.com
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Mechanical Assembly]]> Mechanical Assembly - Installation Assistant
$14
Start August 2nd

This is a Temporary Project that will run until the beginning of October.
Shift will be determined closer to start date but can be anywhere from 5am - 6:30PM.

Will be assisting with the retrofit of work stations and the installation of new work stations into a distribution center in Kenosha County. 

Qualifications:

  • Ability to follow explicit build instructions
  • Strong measuring tape use and skills
  • Strong knowledge of tools and the applications for them
  • Ability to work independently or in a group
  • Flexibility in work schedule to work evenings and weekends
  • Ability to lift 50 lbs

If interested please send a resume to: Milwaukee@TRNstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Wax Assembly]]>
$9.50/Hour ($.50 increase upon permanent hire, + $.50 increase in 3 months)
Hours: 6:00 am - 4:30 PM Monday-Thursday
Temp-to-hire potential

Duties include:
Assist the Machine Operator in the use of a Rolling Machine preparing sheet wax
Assist the Machine Operator in the use of a Die Cutter cutting wax to size
Wipe down sheet wax readying it for shipping

Requirements include:
Reliable transportation
Excellent attendance
HS diploma or GED required
Must be able to lift 50 pounds! Lift Test
Prescreen Testing required

If interested, please send resume to Amherst@trnstaffing.com ]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Customer Service]]> Elyria, Ohio company seeks a full time Customer Service/Office clerk.
$9.50/hr.
Hours: 8AM 4:30PM, Monday Friday
Temp-to-Hire potential with room for growth


Requirements include:
Candidate must be computer savvy
Working knowledge of Microsoft Office (Excel & Word) & Microsoft Outlook
Pleasant phone voice
Ability to work independently
Strong work ethic
Willingness to learn company specific software program (Macola Manufacturing).
Pre-screen testing is required
High School diploma/GED required

If interested please submit resume to amherst@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Receiving]]> Medina warehouse is looking for an Order Sorter in their Receiving Area.

         1st Shift - 7-3:30

         $10/hr

 

Duties:

              Use Scanner gun

              Loading and unloading heavy boxes

              Very physical must be able to lift 50lbs

              Eventually this person will learn to use a cherry picker

 

Requirements

              Lift up to 50lbs

             Pre-screening testing required.

              Look for someone willing to work hard and make DDM their home.

 

Benefits

              Merit increases based on performance. 

              Health benefits and 401K available. 

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[General Labor]]> Avon, Ohio company has an immediate need in their Production Department.
$9.50/Hour
Hours: 6:00AM 4:30PM, Monday Thursday; If O/T: Friday 5:00AM 1:00PM
Temp-to-Hire, ($.50 increase upon hire; Additional $.50 increase after 90 days)
Duties include:
Performance of various tasks, somewhat physical in the general Production Dept. depending on company needs
Requirements include:
General lifting of raw materials and finished goods up to 50 lbs.
Performance of all job functions in a safe manner
Excellent attendance record
Strong work ethic
Positive attitude
Reliable transportation
High school diploma or GED
Pre-screen testing required

If interested please submit resume to Amherst@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Packer]]>  

 

We have 2nd Shift Entry Level Packer Positions open at the Duck Tape Factory in Avon to start ASAP.

This position is through The Reserves Network, office phone 440-937-1499.
No HS diploma or GED needed.
Great opportunity to start your career!
Must have reliable transportation
Must be able to pass drug screen/background check
Very clean environment - Friendly people

2nd Shift $9.75 Monday Thursday 3:00pm 1:30am (4) 10 hour shifts

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Assembly]]> Lake county area manufacturer seeks General Labor/Assembly Associate

         2nd shift Monday through Friday,  3PM - 11:10PM

         $11/hr

 

Duties include:

 

         Assembly of automotive hoses

 

Requirements include:

 

         Previous experience in a manufacturing based position is a plus

         Punctuality and attendance are critical

         Qualified candidate must have High School Diploma/ or GED

         Pre-screening testing is required

 

If interested please send resume to: mentor@trnstaffing.com

]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Production Worker]]> Beauty products manufacturing company in Ottawa, IL seeking first  and second shift production workers. Fast paced work up to 10 hours a day. Some Saturday work will be required. Ability to lift up to 50lbs. repetitively, prolonged standing. Good attendance and dependability required. Increases based on attendance and productivity.


Job Requirements:

*prolonged standing for up to 10 hours
*ability to work well with others
*Good attendance
*Dependability
*able to pass pre-screen requirements

If interested please send a resume to:  Sigan@trnstaffing.com

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[CNC Lathe]]> North Orlando Company seeks Full Time CNC Operator/Machinist

Clean and  Air Conditioned Environment! Great Benefits!

         2nd Shift, 415pm - 245am

         Monday - Thursday

         $16-$22 per hour, DOE

Duties Include:

         Set up and Operate CNC Machines

         Maintain Quality

         Responsible for Safety

         Performs various Machine functions such as cutting, drilling, milling, boring of metal pieces

         Set up machines depending on tooling requirements and control settings

         Mounts, aligns and secures tooling/attachments on machines

         Select and Install cutting tools in machine spindle

         Loads Control media or enters commands to retrieve pre-programmed instructions

         Calculate and set machine controls

         Trouble shoot and rework fixtures when needed

Requirements Include:

         High School Diploma or GED

         Able to read and interpret blueprints, planning sheets and related data

          4-5 years experience operating and programming a CNC Mazak/Chiron Multi Axis Machines

         Lift up to 50lbs

         Able to use Tape Measure and Hand Tools

         Experienced with Geometric Dimensions and Tolerance

         Experienced in working with Aluminum, Stainless Steel, Alloys and Titanium

         Must pass client pre-screening process

         Able to stand on feet throughout shift

         Experienced with Shop Traveler

 

 If interested please send a resume to: winterpark@TRNstaffing.com

 
Then call us at 407.774.7770 today!

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[Coating]]> A Fairview Manufacturer is currently seeking a Coating Technician

  • Hours: First Shift 7:00am - 3:30pm
  • Pay: $10.50/hr

The primary role of this position is to set up and run machinery used to apply graphics and decorations to commercial retail packaging.

Requirements:

         Superior attention to detail

         Previous manufacturing/production experience

         Excellent team work and communication skills

         Commitment to attendance and punctuality

         Ability to sit, stand, and walk for extended periods

         Precise and legible record keeping

         No heavy lifting (50+ pounds) will be required; however moderate occasional lifting will be necessary

         Dependable transportation to and from all scheduled shifts

 If interested please send a resume to: erie@TRNstaffing.com

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[Maintenance]]> A Fairview Manufacturer is seeking a Maintenance Machine Repair

  • Shift: 3rd 11pm-7am
  • Pay: $12.75-17.25/hr depending on experience

Job Responsibilities:

  • Visually inspects and test machine equipment
  • Determine the cause of machine trouble, plan repair parts needed, look up part numbers, and recommend to maintenance supervisor repair parts needed
  • Dismantles defective machines and equipment and installs new orrepaired parts
  • Assist in maintaining spare parts area for machines
  • Perform job assignments from work order form, filling out properly, with sign off in a timely manner
  • Assist in the installation of new equipment and machines
  • Able to work extra and unusual hours as required
  • Remain current in major skills through self-improvement programs
  • Will maintain good safety and housekeeping standards
  • Operates cutting torch or welding equipment to cut or join metal parts
  • Fabricates and repairs counters, benches, partitions, and other wooden structures
    coordinate and recommend solutions to major machine problems with maintenance and machine shop supervisors
  • Perform other maintenance duties as assigned

Job Requirements:

  • Able to read schematics, wiring diagrams, blue prints and drawings
  • Must be able to follow written and verbal instructions
  • Possess troubleshooting ability to determine machine problems, diagnose and repair most machine problems

If interested please send a resume to: erie@TRNstaffing.com

 

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[Quality Technician]]> QUALITY TECHNICIAN
1ST SHIFT
$16 - $19 per hour based on experience

Busy family owned fabrication shop is looking for a Quality Technician to assit their team with a 6 month project.

  • Inspection of metal fabricated parts in both the component and assembly phase/level
  • Documentation of parts and assemblies (PPAP, FAI, Full Dimensional Layouts)
  • Collaborate with external customers regarding inspection results
  • Interact with team regarding product dispositions, non-conformance and subsequent Corrective/Preventative Action and Root Cause Analysis
  • Collect Quality data and generate reporting/updates

Qualifications:

  • High school diploma or equivalent
  • At least 3 years of experience working with inspection methods/criteria 
  • Prior experience with weld and paint inspection
  • Proficiency with MS Word and Excel
  • Basic math skills necessary to include fractions and decimals
  • Prior experience with blueprint reading/tolerances
  • Ability to read/use ruler, calipers, gauges and measuring instrumentation

If interested please send a resume to: Milwaukee@TRNstaffing.com

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[CNC Operator]]> Fairview Manufacturer seeking CNC Machinists for Temp-to-Hire Opportunities 

  • Shift: Third Shift, 11pm - 7am
  • $10-14/hr (based on your level of experience)
  • Entry level and experienced

Responsibilities Include:

  • Program, set up and run one or more machines
  • Read blueprints and job orders
  • Knowledge of measuring equipment
  • Troubleshoot major problems

Requirements Include:

  • One year certification from college or technical school; related experience and/or training; or equivalent combination of education and experience
  • Strong work ethic/history
  • Ability to work well as a team member

If interested please send a resume to: erie@TRNstaffing.com

]]>
Mon, 24 Jul 2017 00:00:00 EDT 0
<![CDATA[CNC Machinist]]>
  • Shift: Second Shift, 3pm - 11pm
  • $10-14/hr (based on your level of experience)
  • Entry level and experienced
  • Responsibilities Include:

    • Program, set up and run one or more machines
    • Read blueprints and job orders
    • Knowledge of measuring equipment
    • Troubleshoot major problems

    Requirements Include:

    • One year certification from college or technical school; related experience and/or training; or equivalent combination of education and experience
    • Strong work ethic/history
    • Ability to work well as a team member

    If interested please send a resume to: erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC Machinist]]>
  • Shift: First Shift, 7am - 3pm
  • $10-14/hr (based on your level of experience)
  • Entry level and experienced
  • Responsibilities Include:

    • Program, set up and run one or more machines
    • Read blueprints and job orders
    • Knowledge of measuring equipment
    • Troubleshoot major problems

    Requirements Include:

    • One year certification from college or technical school; related experience and/or training; or equivalent combination of education and experience
    • Strong work ethic/history
    • Ability to work well as a team member

    If interested please send a resume to: erie@TRNstaffing.com

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Quality Inspector]]> QUALITY INSPECTOR

    Milwaukee County machine shop is looking for experienced Quality inspector to join their team. 
    Description:

    • Perform first piece, in-process and final inspection of machined parts in this job shop / contract machining environment
    • Will use micrometers, calipers, veneers, optical comparators, go and no-go gauges etc.
    • This is an ISO-certified machining environment.
    • Brown & Sharpe CMM - PC-DMIS programming

    Requirements:

    • High school diploma or equivalent
    • Minimum of 3 years experience as a machining inspector and an ability to use all normal inspecting devices.
    • Must also have experience with ISIR in an ISO-certified machining environment.
    • PPAP experience is also required.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[General Labor]]> GENERAL LABOR
    1st and 2nd shift available
    $13/HR.

    Busy manufacturer has multiple openings for General Labor.  This position is responsible for removing parts from sheet metal and completing secondary work (manual filing and grinding). Will also stack finished parts on pallets or carts.

    Qualifications:

    • High school diploma or equivalent
    • Some manufacturing or fabrication experience desired but willing to train the right candidate.
    • Ability to lift up to 45 lbs.
    • Attention to detail
    • Ability to stand on feet for up to 6 hours.
    • Material knowledge preferred but can be taught on the job.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> Girard, PA Manufacture seeks Punch Press Operator

    • Pay: $9.50/hr
    • First Shift
    • Monday - Thursday

    Responsibilities Include:

    • Safe operation of high tonnage metal forming presses, including feeding of coilded metal into the press
    • Inspection of product produced at each assigned press
    • Inspection will be a gauged and visual inspection
    • Proper completion of all associated paper work and reports
    • Packing the product, including building boxes, preparing and laoding pallets and labeling cartons
    • Maintain a clean work environment

    Abilities Include:

    • Ability to use hand tools
    • Must be in good health and able to lift 40#
    • Work well with others with minimal supervision
    • Very noisy with various high tonage metal froming presses running continuously

    If interested please send a resume to: erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC Machinist]]> CNC Setup/Operator Machinist

    2nd Shift
    Work Schedule - 2:30pm-11:00pm

    Industry leading OEM manufacturer is in need of skilled Machinists to join their 2nd shift team. Will be responsible for performing set-ups and machine operations; load and edit programs; read blueprints and inspect finished parts. Perform manual machine operation set-ups and processes; read blueprints and inspect finished parts. Also perform Orbit Forming and Roller setup and operations.

    • Understand CNC programming formats, G and M codes and Manual Data Input (MDI
    • Knowledge of set up and operation of CNC machines to produce piece parts according to blueprint
    • Edit CNC programs to make adjustments
    • Read and interpret engineering blueprints and work orders/instructions
    • Operate manual mills, lathe, drill presses and orbital rivet machine

    Qualifications:

    • High school diploma or equivalent
    • Basic knowledge of CNC program editing experience required.
    • Basic set-up experience required.
    • Ability to perform basic electronic tasks using computer software and Microsoft Office.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Band Saw Operator]]> CNC SAW OPERATOR

    1st and 2nd Shift available

    Pay based on Experience

    Welding and Fabrication facility with deep ties to the community is looking for Saw Operators on 1st and 2nd shift.  This forward thinking employer values training and will train the right person with some CNC shop background. Highly competitive wages and a full line of benefits available.

    Qualifications:

    • High school diploma or equivalent
    • Must have at least 2 years of Saw experience with steel
    • Must be able to read a ruler to 1/32

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Tooling Designer]]> TOOLING DESIGNER
    1ST SHIFT
    $26-35/HR.

    Family owned company with 50 years of growth in the Milwaukee area is looking for a Tooling Designer to join their talented team of professionals.

    • Design stamping dies per customer specifications
    • Layouts
    • Perform reverse engineering
    • Work in the latest version of Solidworks and Logo Press.

    Qualifications:

    • Degree in design engineering or equivalent experience
    • Must have at least 2 years of solidworks experience
    • Must have experience designing tooling; stamping dies preferred

    If interested please send a resume to: Milwaukee@TRNstaffing.com 

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Cutoff Operator]]> Cutoff Operator
    1st shift
    $13-16/HR. Based on Experience

    Entry Level opportunity.  Company looking to train the right candidate to fill this role.

    Waukesha County employer thrives on training and developing their people.  They are currently looking for a dynamic and eager person that has at least 1 year of manufacturing experience and looking for that next opportunity.  Good starting wages and excellent benefits available.

    • Remove gates and risers from castings either through arc-air cutting or saw cutting.
    • Identify the alloy being cut
    • Cut with saw or arc-air being careful to only remove non casting material
    • Separate the returns into the proper tubs
    • Place like alloy parts in tubs or pallets and label with part number and due date

    Qualifications:

    • High School diploma or equivalent
    • At least 1 year of related Manufacturing experience
    • Must have strong basic math and measurement skills
    • Previous saw, crane and forklift experience is a plus

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Quality Inspector]]> A Fairview Manufacturer seeks Quality Inspector

    • First Shift: 7:00am - 3:00pm
    • Pay: $10.30 - 14.70/hr

    Responsibilities Include:

    • Inspect, tests, and adjusts new and reworked tools, dies, gauges, jugs and fixtures for conformance to specifications such as dimensions, tolerances, and hardness
    • Compute angles and other dimensions
    • Positions workpiece on surface plate and lays out reference points and center lines on part
    • Measure angular dimensions, clearances, and other specifications
    • Tests parts for hardness
    • Inspects, and verifies accuracy of gauges and measuring instruments for conformance to specifications
    • Examine defective parts to determine cause of defect and recommends changes or modifications
    • Measure surface finish of parts
    • Inspect first run, in-process and trial parts and assemblies
    • Operate CMM

    If interested please send a resume to: Erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Set Up Technician]]> Setup Technician

    2nd shift - 4:15pm-2:45am
    $18-23/hr. BOE

    Leading injection mold manufacturer is looking for a Set Up Technician to join the core part of their team.  Competitive wages and comprehensive benefit package.

    • Perform set-ups on various injection molding machines, including the execution of molding machine programming and gauging per customer s requirements while supporting Production Inventory Control.
    • Input inventory levels into a computerized database.
    • Check and maintain the quality of the products being produced in accordance of the Quality standards set.

    Qualifications:

    • High school diploma or equivalent or 2 years of related experience.
    • Ideal candidate will have 5 years of experience; journeyman a plus.
    • Must have strong mechanical aptitude and have the ability to use basic hand tools.
    • Previous forklift experience.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Sanitation]]> A Lake City Manufacturer seeks Sanitation Crew

    • Third Shift
    • Typical start time 10:00pm Sunday through Thursday, 8:00pm  on Friday, 6:00pm on Saturday
    • Weekends are required
    • Pay: $9.25

    Responsibilities Include:

    • Properly disassembling, washing, rinsing, sanitizing and reassembling equipment
    • Following proper cleaning procedures
    • Assisting with line change overs and set ups
    • Cleaning of production area walls, ceilings and floors
    • Meeting and exceeding all regulatory requirements

    Requirements Include:

    • Ability to lift up to 50 pounds on regular basis
    • Mechanical ability preferred
    • Ability to get wet and/or dirty during shift

    If interested please send a resume to: erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Packer]]> A Lake CIty Manufacturer seeks Second Shift Packers

    • Day to Day scheduling
    • Shift typically starts between 3:00pm - 4:30pm
    • Up to 12 hour shifts, at times
    • 20-50 hours a week depending on production
    • Pay: $9.00/hr

    Responsibilities Include:

    • Packing food product into boxes
    • Unstack trays for others to fill with products
    • Prepare boxes to be filled

    Requirements Include:

    • Ability to safely work around moving machinery
    • Ability to keep work area clean throughout shift
    • Ability to perform repetitive tasks at a fast pace

    If interested please send a resume to: Erie@TRNstaffing.com

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Packer]]> A Lake CIty Manufacturer seeks Third Shift Packers

    • Day to Day scheduling
    • Shift typically starts between 11:00pm - 12:30am
    • Up to 12 hour shifts, at times
    • 20-50 hours a week depending on production
    • Pay: $9.00/hr

    Responsibilities Include:

    • Packing food product into boxes
    • Unstack trays for others to fill with products
    • Prepare boxes to be filled

    Requirements Include:

    • Ability to safely work around moving machinery
    • Ability to keep work area clean throughout shift
    • Ability to perform repetitive tasks at a fast pace

    If interested please send a resume to: erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Polisher]]> POLISHER
    2nd Shift
    $23.67/HR + Shift Premium

    Industry leading equipment manufacturer with a 100 year history in the Milwaukee area.  Currently looking to fill multiple Polishing/Buffing positions on 2nd shift.  Great wages and excellent benefits available.

    • Select and operate grinding, polishing and buffing equipment to obtain desired finish and contour shape of cabinetry with a high grade finish.
    • Select equipment, wheels, dressings and abrasive best suited to obtain the necessary high grade finish.
    • Build up, glue, surface, dress and balance all types of finishing wheels and select and apply polishing compounds.
    • Apply and manipulate work to wheel or wheel to work exercising proper pressure and duration to polish, and buff using care to maintain contours, radii, close dimension and relative shape.
    • Obtain smooth, even finish and color buff or blend on high grade cabinetry or sheet metal products.
    • Check and inspect work using rule, scale, fixed and adjustable measuring devices, contour gauge.

    Qualifications:

    • High school diploma or equivalent.
    • Minimum of 3 years of polishing and buffing experience.
    • Apprenticeship training or other equivalent job training required.
    • Must be able to work from prints.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Estimator]]> Estimator
    Pay Based on Experience

    Milwaukee manufacturer looking for experienced Estimator to join their growing team.  Business is booming and so are the opportunities!  Advancement, above average wages and comprehensive benefits are available.

    Estimators are to use their knowledge of fabrication processes, materials, tooling and equipment capabilities, assembly methods and quality standards to evaluate and develop a quote in a timely manner from drawings, samples and customer interface to determine the most efficient/cost effective method of fabricating parts and assemblies.

    • Evaluate, prioritize, schedule, price and follow-up on requests for quotation.
    • Develop accurate and complete routings, specifying the sequence of the manufacturing process, process treatments and finishes to develop the piece part price using established rates and standards. 
    • Support engineers and other staff with information pertaining to pricing strategies and/or risk analysis
    • Propose process and cost alternatives.

    Qualifications:

    • High school diploma or equivalent
    • At least 2 years of Estimating experience
    • Sheetmetal and fabrication experience highly desired
    • Must have intermediate skill level using Microsoft Office; particularly Excel
    • Ability to visualize three-dimensional objects from two-dimensional drawings, interpret a variety of technical instructions and manufacturing standards.
    • Experience with CAD 3-D sheetmetal modeling- Solidworks is a plus

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Metal Finisher]]> Polisher & Metal Finisher
    1st shift
    $15+/hr Based on Experience

    Industry leading Milwaukee County manufacturer is looking for Metal Finisher to manually polish highly cosmetic stainless steel (304 #3 & #4 finishes) and light gage sheet metal parts using hand tools and buffing wheels along with Metal Finishing weldments.

    Qualifications:

    • High school diploma or equivalent required
    • Must have a minimum of 2-3 years of sheetmetal polishing experience.
    • Must be able to work with a variety of parts and sizes.
    • Ability to lift up to 50lbs.
    • Must have strong math, measurement and print reading skills

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Maintenance]]> Maintenance Support / Utility
    Shift: 1st; 5:00 am to 1:00 pm. Will be required to work overtime and Saturdays as needed. May be required to change shifts if workload dictates.

    $15+ Based on Experience

    Waukesha County employer is looking for a Maintenance Support /Utility person to join their growing team.  Competitive wages and benefits are available along with growth opportunity.

    This position is responsible for repair/maintenance of foundry equipment as directed: ie molding machines, core machines, shell machines, grinders, hoists and other equipment.  Will also be responsible for facility maintenance to include; shoveling walkways, salting walkways, cutting of grass/landscaping and janitorial duties.

    Qualifications:

    • High school diploma or equivalent required
    • Prior janitorial and maintenance experience of at least 2 years is a must
    • Individual must be a self-starter and motivated to work in a fast paced environment.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Picker Packer]]> Founded in 1923, our client has become one of the leaders in light manufacturing. A locally owned Parma, Ohio company founded on hard work and dedication needs workers willing to go the extra mile. Everyone works together, empowered as individuals and team players to contribute to the culture of continuous innovation and improvement. We need Pickers and Packers who are looking to start a career with a growing company!

    Opportunities:

    • Pay depends on experience  
    • Monday-Friday Some Saturday required
    • OT is available as well
    • Part time available as well

    Key Responsibilities:

             Pallet Jack to load and unload a truck

             Stock Merchandise

             Using RF scan gun to pick and pack orders

             Physical position requires a lot of strength

             Tow motor experience is a plus

    Qualifications:

    • Must have a high school diploma or equivalent
    • Must work well in a team environment and have strong communication skills
    • Must have good job performance and attendance records
    • Willingness to work at a fast pace
    • Warehouse background is preferred

    Benefits:

    • World Class Staff
    • Friendly culture
    • Medical, RX, Dental, Vision Benefits available (options available)
    • Preventive services immunization and routine health screenings
    • Referral Bonus
    • Weekly Pay

    Keywords: Warehouse, Stocker, Stock Clerk, Receiver, Food Service, Shipping and Receiving

    If interested please send a resume to: jzeilmann@trnstaffing.com

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Call Center]]> Elizabethtown Ky, Call Center
    1st shift, Monday thru Saturday 11AM-8PM.
    $11/HR.
    Duties include:
    Respond to requests for technical assistance in person, via phone, electronically
    Diagnose and resolve technical hardware and software issues
    Research questions using available information resources
    Advise user on appropriate action
    Follow standard help desk procedures
    Log all help desk interactions
    Administer help desk software
    Redirect problems to correct resource
    Identify and escalate situations requiring urgent attention
    Track and route problems and requests and document resolutions
    Prepare activity reports
    Inform management of recurring problems
    Stay current with system information, changes and updates
    Basic computer skills.
    Customer service via telephone.
    Requirements:
    1 year of verifiable experience or training in customer service or call center position.
    Must have general knowledge of office equipment and able to perform general office duties.
    Must be able to pass a background check.

    If interested please send resume to: elizabethtown@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[TIG Specialist]]> TIG WELDING SPECIALIST
    1st shift
    $17+ Based on Experience

    Milwaukee County fabrication facility with leading edge technology is looking for a highly skilled Tig Welder to join their team.

    Will hold tight tolerances working with light gage sheet metal and stainless steel in open table set up.

    Qualifications:

    • High school diploma or equivalent
    • Minimum of 4 years of thin gauge stainless steel experience.
    • Must be able to work from prints.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[General Labor]]>
    Duties include:
    Perform sanitation labor in a factory setting for a meat processing company.
    Follow all appropriate SOPs and GMPs for your assigned area.
    Complete all assigned tasks and shifts as assigned according to production requirements.
    Follow all safety guidelines and wear all required safety gear ensuring a safe work environment for you and your co-workers.

    Requirements include:
    Must be trained in SQF and all additional training as required
    Demonstrate experience and strong Commitment to meeting internal customer requirements and continuous improvement objectives.
    Ability to read and understand documents and procedure manuals.
    Excellent communication skills, ability to handle multiple tasks, organize, and prioritize workload, excellent internal customer service skills
    Standing on ones feet for long periods of time, walking, and lifting. The employee is regularly required to sit, reach with hands and arms. The employee may be required to lift and/or move up to 50lbs on an occasional basis.

    If interested please send a resume to: savannah@TRNstaffing.com  

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Help Desk]]> The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our customer located in located in Clearwater is seeking a Help Desk candidate to join their exciting team.

     

             Pay $14.50/hr.

             First shift.

             Temp to hire for the right candidate.

     

    Duties Include:

             Provide quality phone and email support with a high degree of customer service, technical expertise and timeliness.

             Answering incoming calls, troubleshooting electronic, mechanical, or software failures, customer inquiries, product assembly questions while providing our customers with exceptional customer service.

             Maintain current knowledge on all product offerings and technical support procedures in order to provide accurate solutions to customers.

             Accurately document customer information and a detailed problem/issues description of all support calls/emails in a call tracking system.

             Work independently to solve support issues.

             Resolve customer problems, disputes and complaints in an efficient professional manner and according to company policy.

             Research status of customer orders, equipment returns, repairs or replacements.

             Provide information on possible product problems, pricing of repairs, and/or items not covered under warranty.

             Assist customers with technical phone support on questions for pre-installation, installation, and set-up and configuration of hardware, software and power, and training for finished goods, equipment and products.

             Test and debug operating software for equipment and product completing required testing, quality checks and verification all testing protocols have met specification.

             Tracking of parts shipment 

     

    Requirements Includes:

             Detailed oriented.

             Call Center/Customer Service experiences a plus.

             Organized.

             Great attitude.

             Computer skills.

             Administrative experience

    If interested please send a resume to: clearwaterresumes@TRNstaffing.com

    Please call the office at (727) 228-4010 after resume submittal. Office hours are Monday-Friday 8am-5pm.

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC Mill Operator]]> Sanford Company Needs 3rd Shift Experienced CNC Machine Operators

    • 3rd Shift
    • $14-$17 per hour

    Duties Include:

          Tends one or more machines

    • Records Findings
    • Create Metal work pieces
    • Inspects parts made
    • Add fluid to machine as needed
    • CNC Set Up
    • Read Blue Prints

      Requirements Include:

    • High School Diploma or GED required
    • Able to lift up to 50lbs
    • Stand on feet through out shift
    • Able to follow instructions
    • Detail oriented
    • Basic math skills
    • Mechanical Aptitude
    • Able to use weights and measures
    • Minimum 2 years on CNC machines

     

    Must pass client pre-screening process prior to starting

     

    If interested please send a resume to: winterpark@trnstaffing.com

     

     And then call our office at 407.774.7770

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Shipping]]>
    Duties include:
    Loading empty plastic drums by hand
    Plastic wrapping drums and pallets
    Will be standing for 8-10 hours
    Lifting up to 50 pounds.

    Requirements Include:
    Overnight shift with start time of 7:00 pm
    Must be open to overtime
    Must have prior experience in a manufacturing setting.
    High School Diploma

    If interested please send a resume to: lombard@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Help Desk]]> Elizabethtown Ky, Company seeks helpdesk clerks.
    1st shift, Monday thru Saturday, 11AM-8PM.
    $10/hr.
    Duties include:
    Answering incoming calls daily in a polite and professional manner
    Enter ALL inquiries into the HEAT database (Voicemail, Assigned Calls, Email)
    Provide assistance to Helpdesk Technicians as needed
    Provide support and troubleshooting for customers with Internet access, email , cable TV, and telephone problems, by analyzing, diagnosing and resolving problems
    Provide front-end support for customers via email
    Requirements include:
    Skills to include customer servicing skill sets, Internet knowledge.
    The selected individual must be able to write in a technical format

    If interested please sendd a resume to: elizabethtown@trnstafing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[EDM Operator]]> EDM Operator
    2nd Shift

    Waukesha County employer is looking for an experienced EDM Operator to join their 2nd shift.  This position offers competitive wages and a full line of benefits that includes paid personal days, company provided tools and uniforms along with a climate controlled work environment. 

    • Programming and set-up of EDM machines per CAD prints and operational instructions
    • Enter programs and establish necessary parameters if any variations exist
    • Operate multiple Wire EDM machines
    • Conduct finished part inspection

    Qualifications:

    • High school diploma or equivalent
    • Minimum of 2 years EDM experience required
    • Proven inspection skills and ability to work to very tight tolerances
    • Above average math and problem solving skills; demonstrated ability to use basic trigonometry to calculate angles
    • Computer literate, ability to enter programs and must be able to use measuring/testing equipment
    • Read and interpret blueprints

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift Operator]]>  Orlando Company Needs Full Time  Forklift Operator /Order Puller!

    The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is one of the largest Employers in Central Florida. We are seeking a Forklift Operator/Order Puller for a second shift.

    We Offer:

     

    • 40 hours per week
    • 3pm-11pm shift 
    • Amazing benefits and growth when hired!
    • Must work every weekend when first starting

    Duties Include:

             Pull Orders

             Pack Orders

             Maintain Inventory Control

             Responsible for proper stock rotation

             Operate Forklift and Pallet Jack

    Requirements Include:

             High School Diploma or GED, document must be provided

             Able to work every weekend

             Minimum 2 years experience  as a  Forklift Operator

             Experienced in using an RFP Scanner

             Able to work at higher level in warehouse

             Non Smoking Candidates Only

             Must pass client pre-screening process

    Client has no public transportation access near their facility, candidates must have reliable transportation.

    If interested please send resume to: winterpark@trnstaffing.com

    and then call us at 407.774.7770 today.

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Calibrator Assistant]]> Orlando Company seeks Full Time Calibrator Assistant

             1st Shift

             Monday Friday, 8am 5pm

             Temp to Hire position

             $13-$14.00 per hour, DOE

    Duties Include:

             Maintain Quality

             Responsible for Safety

             Responsible for Customer Satisfaction

             Electronic Troubleshooting

             Some soldering

             Quality Inspection of equipment

             Prep or Calibrate equipment

    Requirements Include:

             High School Diploma or GED

             2 years experience with Electronics a plus

             Lift up to 50lbs

             Able to use Tape Measure and Hand Tools, mechanically inclined

             Must have exceptional hand writing and communication skills

             Must pass client pre-screening process

             Intermediate Computer skills, especially Microsoft Office

             Experienced  with Customer interactions

             Very Accurate and Detail oriented, a perfectionist when it comes to your work

             Able to do repetitive work

             Able to work Overtime if needed

    If interested please send a resume to: Winterpark@trnstaffing.com

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Shipping]]>
    Duties include:
    Loading empty plastic drums by hand
    Plastic wrapping drums and pallets
    Will be standing for 8-10 hours
    Lifting up to 50 pounds.

    Requirements Include:
    Overnight shift with start time of 7:00 pm
    Must be open to overtime
    Must have prior experience in a manufacturing setting.
    High School Diploma

    If interested please send a resume to: Lombard@trnstaffing.com
    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Maintenance]]> The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is a large manufacturer in Sanford, FL. We are seeking a Maintenance Tech for this facility for 1st shift.

    We Offer:

    • Full time opportunities
    • Monday through Friday schedule
    • Excellent career advancement
    • $16 - $20 an hour , DOE

    Job Duties Include:

    • Perform preventative maintenance for various CNC Machines
    • Record findings
    • Trouble shoot issues on pneumatic and hydraulic machines
    • Operate forklift when needed
    • Communicate with Department Managers

    Job Requirements:

    • Ability to lift up to 50 pounds-must be able to perform physical requirements of the position
    • 3+ years experience or graduate from a technical school
    • HS Diploma or GED
    • Must be able to stand up to 8 hours.
    • Good communication skills and work close as a team
    • Mechanical Aptitude
    • Detail oriented

    Career Advancement:

    • Full time career opportunities available. 
    • Company offers; medical, dental, vision, direct deposit, 401K, paid vacation and sick leave.

    If interested please send a resume to: winterpark@trnstaffing.com

     

    And then call our branch immediately at 407.774.7770

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> Position Summary
    Set up, operate or tend welding machines or robots to treat metals and alloys. Follow quality control requirements for high strength, pressure and aesthetics.


    Essential Job Functions
    o Perform process evaluation by completing forms prior to shift or operating macines.
    o Assemble, align and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
    o Load workpieces into welding machines.
    o Start, monitor, and adjust robotic welding productions lines.
    o Turn and press buttons to start welding machines.
    o Install appropriate electrode size and type, tips , and welding rod or wire.
    o Remove part from welding machines and place final products into containers.
    o Record operations information on specified production reports.
    o Test and visually inspect completed workpieces for defects or quality issues, using leak tests.
    o Use hand tools, such as hammers, chisels, wrenches, and wire cutters.
    o Notify maintenance or Team Leader to correct problems with machine operation.
    o Follow written instructions from quality control to ensure conformance with specifications.
    o Notify quality control of any defective parts
    o Follow standard work instructions.


    Requirements
    o Must be able to speak and read basic English to comply with positions, Safety, Plant & PPE procedures & requirements
    o Must be willing to cross train
    o Must be able to work required overtime
    o Must comply with attendance and punctuality policy
    o Must be able to lift 10 to 15 lbs. continuously

    If interested please send a resume to: lombard@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> Global Auto Parts Manufacturing near Glendale Heights looking to partner with dedicated Machine Operators. Our customer supports major auto manufactures by producing quality parts that go into the cars we drive everyday!

    Job Purpose: Set up, operate or tend machines or robots that perform processes to weld and treat metals/ alloys.

    Job Functions:
    Assemble, align and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
    Start, monitor, and adjust robotic welding productions lines.
    Remove part from welding machines and place final products into containers.
    Test and visually inspect completed workpieces for defects or quality issues, using leak tests.

    Job Requirements:
    Must be able to speak and read basic English to comply with positions, Safety, Plant & PPE procedures & requirements
    Must be willing to cross train
    Must comply with attendance and punctuality policy
    Must be able to lift 10 to 15 lbs. continuously
    Must be able to work required overtime


    If interested please send a resume to: Lombard@trnstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Punch Press Setup Operator]]> PUNCH PRESS SETUP
    1st SHIFT
    $17/HR. BOE

    Milwaukee County manufacturer is looking for an experienced Punch Press Set Up Operator to join their team on either 1st or 2nd shift.  This company offers competitive wages, benefits and the opportunity to learn and grow within the organization.

    • Produce parts from metal using a punch press
    • Review blueprints or plans for the finished product, make adjustments to the machine to control speed, material feed and path of the punch, as well as make sure the machines are set up properly, working well, and producing quality product.
    • Check machine is working properly
    • Stock needed materials
    • Inspect finished parts

    Qualifications:

    • High school diploma or equivalent
    • At least 1 year of experience setting up and running a punch; sheet metal experience highly desired
    • Must have strong math and measurement skills

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Catcher]]> Global Auto Parts Manufacturing near Glendale Heights looking to partner with dedicated Parts Unloaders. Our customer supports major auto manufactures by producing quality parts that go into the cars we drive everyday!

    Job Functions:
    Remove materials and products from machines and equipment, and place them in containers.
    Stack and sort completed parts into containers.
    Clean and maintain work areas to ensure proper functioning and safe work conditions.
    Set up receiving containers.

    Job Requirements:
    Must be able to speak and read basic English to comply with positions, Safety, Plant & PPE procedures & requirements
    Must comply with attendance and punctuality policy
    Must be able to lift 10 to 15 lbs. continuously
    Must be able to work required overtime


    If interested please send a resume to: Lombard@trnstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Tube Bender]]> TUBE BENDER
    1st shift
    $18 - 25/hr BOE

    Milwaukee County manufacturer is looking for an experienced Tube Bender to join their growing team of over 75 years as a full service fabricator. Competitive wages and benefits available.

    • Set up, adjust and operate manual and CNC controlled tube and pipe bending machines.
    • Will work on various machines depending on the size of the pipe/tube
    • Pipes/Tubes up to 21 ft long - 1/4" - 6" in diameter
    • Will program the machine for the radius, lengths, etc
    • Guide the material through the machine, checking accuracy at various stops during the bending process

    Qualifications:

    • High school diploma or equivalent
    • One year of tube and pipe bending experience
    • CNC Programming experience required
    • Basic math and some trigonometry necessary.
    • Work from drawings, patterns, templates and specifications.
    • Must be able to read blueprints and use common measuring instruments as used in tube and pipe bending.
    • Have experience operating over head crane & forklift.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift]]> Elizabethtown Ky, Company seeks Forklift Operator.
    1st shift, Mon thru Fri
    $10/Hr. .50 cent raise upon hire
    Duties include:
    Drive and operate forklifts in order to move heavy merchandise
    Unload inbound shipments
    Move products to storage locations
    Stack and store merchandise in appropriate places
    Prepare and stage skids for outbound shipments
    Assist with picking and packing
    Assist with pallet building
    Ensure Safe activities within the warehouse
    Requirements include:
    1 year of Experience in Forklift
    Ability to lift up to 50lbs assisted
    Steel toed shoes
    Safety glasses

    <If interested please send your resume to: Elizabethtown@trnstaffing.com>


    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Welder]]>

    Global Auto Parts Manufacturing near Glendale Heights looking to partner with dedicated MIG Welders. Our customer supports major auto manufactures by producing quality parts that go into the cars we drive everyday!


    Job Purpose: Completing and reworking auto parts to meet proper compliance.


    Job Functions:
    Develops welding projects by analyzing work orders, prints, and completed assembly; calculating requirements; studying metals; determining appropriate welding techniques
    Verifies welding results by inspecting and testing welds
    Fabricates components by using equipment to clean, prepare, cut, burn, and weld pieces; setting-up and measuring assemblies; selecting appropriate method
    Documents actions by completing records


    Job Requirements:
    Experience with MIG welding
    Must be able to speak and read basic English to comply with positions, Safety, Plant & PPE procedures & requirements
    Must comply with attendance and punctuality policy
    Must be able to lift 10 to 15 lbs. continuously
    Must be able to work required overtime


    If interested please send a resume to: Lombard@trnstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Assembler]]> Assembler - Mechanical
    2nd shift, will train on 1st

    Milwaukee company is looking for immediate hires to join their fast growing team of assemblers.  Great starting wage and benefits available on the first day of permanent hire.

    • Will work on the line or in a cell environment
    • One-on-one training with a Senior Assembler
    • Work from blueprint or schematic
    • Complete paperwork

    Qualifications:

    • High school diploma or equivalent
    • At least 1 year of Mechanical Assembly experience
    • Must have stable work history to be considered
    • Must be able to stand on feet for 8 hour shift
    • Must be able to work from prints

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Shipping]]>
    Duties include:
    Loading empty plastic drums by hand
    Plastic wrapping drums and pallets
    Will be standing for 8-10 hours
    Lifting up to 50 pounds.

    Requirements Include:
    Overnight shift with start time of 7:00 pm
    Must be open to overtime
    Must have prior experience in a manufacturing setting.
    High School Diploma

    If interested please send a resume to: lombard@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Powder Coat Painter]]> Powder Coat Painter

    1st shift

    Busy fabricator looking for an experienced Powder Coat Painter to join their talented paint line team. Competitive wages and benefits available.

    • Powder coat parts
    • Maintain paint equipment
    • Inspect parts as needed to ensure quality coverage
    • May need to load and unload parts as necessary

    Qualifications:

    • High school diploma or equivalent
    • Minimum of 2 years Powder Coat Paint experience
    • Must have eye for detail
    • Must be able to work in a team environment

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Worker]]>
    Duties include:
    Operating plastic blow molding machine
    Moving products to different work stations
    Quality inspecting and leak testing of products
    Placing finished products on conveyer belts

    Requirements Include:
    Lifting up to 50 pounds.
    Overnight shift with start time of 7:00 pm
    Must be open to overtime
    Must have prior experience in a manufacturing setting
    Steel toe boots.
    High School Diploma

    If interested please submit resume to Lombard@trnstaffing.com or call our Lombard location at 630.317.7443.
    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift/Material Handler]]> The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is one of the leading Global Manufacturers in the US. We are seeking Experienced Forklift Drivers for this facility for both 1st and 3rd shifts.

    We Offer:

    • Full time opportunities, 7am - 7pm or 7pm - 7am
    • $14.00 an hour 

    Job Duties Include:

    • Load and Unload Trucks
    • Verify counts and conditions of products
    • Report overages, shortages, and damages to product
    • Prints Production Tickets and attaches to finished product
    • Daily operation check of forklift and cleans after use

    Job Requirements:

    • Ability to lift up to 25 pounds-must be able to perform physical requirements of the position
    • 3 years prior forklift experience
    • HS Diploma or GED
    • Must be able to drive the forklift the entire shift
    • Good communication skills and work close as a team
    • Basic computer skills to complete training as needed
    • Very Detail Oriented
    • Maintain Housekeeping of work areas
    • Basic math skills, such as add, subtract, multiply and divide
    • Must have a prior certification on the forklift
    • Must provide 2 business references
    • Must be able to wear safety equipment, such as ear plugs, eye protection, helmet, etc.
    • Must wear Steel Toed boots
    •  

    Career Advancement:

    • Full time career opportunities available.  Opportunity to advance into leadership positions.  
    • Company offers; medical, dental, vision, direct deposit, 401K, paid vacation and sick leave.

     

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call us at 407.774.7770 today!

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]> The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

     

    Job Duties:

    • Picking orders
    • Moving, unloading and staring materials
    • Ability to work in a fast pace environment
    • Operate sit-down forklift
    • Operate RF Scanning tools
    • Verify and identify parts
    • Remove damaged materials
    • Other duties as assigned

    Requirements:

    • Flexibility and availability are a plus
    • Standing for the duration of the shift
    • Ability to learn to operate sit-down forklifts
    • Good organizational skills
    • Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Assistant]]> Production Control Assistant
    Shift: 7:00 am to 3:30 pm

    Waukesha production facility is looking for a Production Control Assistant to enter production info into computer, run reports for meetings and act as back-up to Shipping and Production Control Departments.

    • Enter production information into daily reports, open and close shop orders, review parts for shop orders, review production schedules and close shop orders.
    • Process daily scrap reporting and review for makeups.
    • Run daily shipment reports.
    • Act as back up to: Shipping/Inventory Coordinator and Outside Service Coordinator.

    Qualifications:

    • High school diploma or equivalent
    • Previous BPCS/AS400 experience, computer experience and good communication skills.
    • Prior manufacturing experience is preferred.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Journeyman Machinist]]> JOURNEYMAN MACHINIST

    Waukesha County machine shop is looking for a Journeyman Machinist to join their growing team. The ideal candidate will have completed an Apprenticeship Program for either Machinist or Tool & Die; or have a minimum of 5 years of applicable experience doing tasks expected of a
    Journeyman.

    • Follow instruction of management, customers and other team members to complete tasks in an efficient and safe manner.
    • Create necessary documents and programs for machined components.
    • Contribute to continuous improvement initiatives to reduce cycle time and scrap rates,
      while improving tool life and overall consistency of process.
    • Create Work-holding and Fixtures for production parts.
    • Machine parts to Customer and internal prints.
    • Manufacture prototypes.
    • Train other employees in running production parts.
    • Inspect parts for conformance.
    • Create and maintain documents for production parts.

    Qualifications:

    • Must be able to take projects from start to finish including; planning, tool selection,
      material selection, programming, and inspection.
    • Experience with Milling and Turning operations, and understanding of CAM systems.
    • Ability to teach, train, or mentor other employees on specific tasks when needed.
    • Basic computer knowledge and working understanding of MS Office tools.
    • Experience in tooling selection, best practices and application as it relates to CNC
      Turning.

    Benefits:

    • Health Benefits after probation period
    • IRA with 3% company match after probation period
    • Paid Vacation after probation period
    • Paid Holidays from Day 1
    • Profit sharing after probation period
    • Competitive wages
    • Climate controlled facility
    • Newer equipment
    • Paid Training

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Finish Grinder]]> Finish Grinder
    1st shift

    Milwaukee fabricator is looking for a Finish Grinder to join their job shop. This family run business offers competitive wages and benefits.

    • Will work on sheet metal and some stainless
    • Parts vary in size and can be quite large
    • Will work with 7" grinder

    Qualifications:

    • High school diploma or equivalent
    • Must have finish grinding experience.
    • Must have high attention to detail to create quality finish
    • Experience grinding on castings is not a fit for this position

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Trim Press Operator]]> TRIM PRESS OPERATOR

    1st Shift

    Washington County employer is looking for a Machine Operator to join their busy team.  This machine is siimilar to a brake press or punch press.

    Will be responsible for loading and unloading the machine with parts, trimming parts and performing inspection.  This position does require the ability to stand for an 8 hour shift.

    Qualifications:

    • High school diploma or equivalent
    • Must have at least 1 consecutive year of prior machine operating experience
    • Must have good hand/eye coordination

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Screw Machine Operator]]> Screw Machine Operator

    2nd Shift - 4 day work week

    Will train the right candidate.

    Milwaukee County machine shop is looking for experienced Screw Machine Operators or Machine Operators looking to learn Screw Machining. Competitive wages, full benefits including uniforms and career advancement opportunity.

    Will be responsible for setting up and operating single or multi-spindle screw machines with automative indexing and bar stock feeders.

    • Reads blueprint job order for product specifications such as dimensions, tolerances, number of parts to be machined, and tooling instructions such as cutting speeds, feed rates, depth of cuts, and cutting tools to be used.
    • Positions and secures specified collets, bushings, and stock pushers onto stock feeding mechanism and loads bar stock into feeding mechanism.
    • Installs and adjusts specified cams, gears, and stops to control stock and tool movements at each station.
    • Positions and secures tools in tool holders.
    • Sets cutting speeds and feed rates.
    • Moves controls to cycle machine through settings, stopping machine and adjusting tool positions and machine controls to allow for operating factors such as timing, clearance between moving parts, and chip removal.

    Qualifications:

    • High School diploma or equivalent
    • Screw Machine experience desired but willing to train the right candidate
    • Able to read a caliper & micrometer
    • Able to read basic blue prints
    • Mechanically inclined

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC T/C Setup]]> CNC Lathe Machinist
    First shift - 4 day work week

    Milwaukee County machine shop is looking to add a talented CNC Lathe Machinist to their growing 2nd shift.  This company offers competitive wages, benefits and career advancement opportunity.

    • Set up machine to be used for production.
    • Assist with quality control plan details.
    • Read blueprint, job order and tooling instructions for production requirements.
    • Machine parts to required specifications.
    • Inspect machined pieces to verify conformance to specifications.
    • Replace worn tooling as needed.
    • Perform daily preventative maintenance duties.

    Qualifications

    • High School diploma or equivalent
    • Must have at least 4 years of CNC Lathe Set Up experience
    • Must have strong math and measurement experience
    • Must have blueprint reading experience

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Receiving Associate]]> South Orlando Company seeks Full Time Receiving Warehouse Associate

    The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is a growing company in South Orlando. We are seeking a Warehouse Receiving Associate, someone who is disciplined, eager to work and a fast learner.

             1st Shift, 8am 5pm, Mon - Friday

             $12-$13 per hour, DOE

             Temp to Hire

             Amazing benefits and growth opportunities!

    Duties Include:

             Responsible for Safety

             Order Receiving, entering information into FEDEX or UPS shipping system

             May assist in other areas of the warehouse as needed

             Used to receiving a variety of parts, skus

             Will cut products to order, will build crates for products to be shipped in

    Requirements Include:

             High School Diploma or GED

             Minimum 1 year experience, prefer in an electrical supply warehouse

             Basic Math abilities

             Able to use Tape Measure and various pneumatic and power tools

             Must pass client pre-screening process

             Able to lift up to 50lbs.

             Proficient in Microsoft Word and Excel

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call  our office at 407.774.7770 today!

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Burn Table]]> CNC Fuel Gas/Plasma Burning Operator
    2ND SHIFT
    wages - BOE will be determined after the interview and assessment

    Waukesha County manufacturer is looking for an experienced Burning Table Operator to join their 2nd shift.  This position offers competitive wages, benefits and more.

    • Verifies correct quantity and cut quality of parts burned.
    • Performs 1st Piece and Random Dimensional Inspections with the aid of the Shop Order Packet.
    • Operate a sander/grinder to deburr sharp edges.
    • Read, convert and understand Metric and English drawings.
    • Perform minor repairs and preventive maintenance required to keep the burring machine in good working order. Notifies supervisor when maintenance is required.
    • Work from drawings, programs, plottings, and specifications: use required measuring instruments and gauging devices to check progression of work and final product.
    • Basic operations of track and hand burning functions.
    • Set-up and burn with fuel gas bevel cutting tip.
    • Set-up and burn structural shapes and 3 dimensional parts.
    • Set-up and perform oxygen piercing.
    • Set-up CNC Programs for cutting operations

    Qualifications:

    • High School diploma or equivalent
    • 4 Years of experience with General Shop Duties
    • 2 Years of experience with Manual &/or CNC Burning
    • Must have strong math and measurement skills
    • Must be able to work from prints
    • Programming Skills preferred

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Welder - Tig]]> TIG Welder
    2nd shift

    Milwaukee manufacturer is looking for a TIG Welder to set up, operate and weld stainless steel.  This is a Temp to Hire opportunity that offers competitive wages, benefits and advancement opportunities.

    • Perform setups and all position arc, heliarc and oxyacetylene welding operations on a line of cabinet and component parts consisting of light gauge metals such as cold rolled, stainless, galvanize and aluminum, brass, etc. requiring a broad knowledge of welding technology in addition to long-term experience.
    • Plan and determine welding procedures and techniques; select type of welding equipment and consumable rod required to conform with the metal characteristics of the components to be welded, the material setups, welding position and the specifications involved.
    • Select, setup welding equipment required, position, jig-up or clamp material to be welded to dimensional requirements, adjust current input, select gas, orifice and regulate gases to obtain proper weld and maximum strength.
    • Vary welding procedures and methods relative to type of welding performed e.g., pre-heat components, vary techniques to avoid oxidation and distortion and to do vertical welding.
    • Perform thin or heavy section downhand or vertical position welding on similar or dissimilar metals for mechanical and structural strength.

    Qualifications:

    • High school diploma or equivalent
    • 2 years of TIG Welding experience or a combination of experience and training
    • Must have strong math and measurement skills
    • Must be able to work from prints

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Project Coordinator]]> Project Coordinator Needed for Manufacturing!

    The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is one of the largest Manufacturers in Central Florida. We are seeking a Project Coordinator for this facility for 1st shift. This is for a Full Time Quality Improvement Project

             1st Shift, 40 hours,  Mon - Friday

             $16-18.50 per hour, DOE

    Duties Include:

             Reports to Director of Quality

             Maintain Files and Records

             Participating in Meetings

             Monitor and balance inventories

             Labor Review in a manufacturing environment

             Review Product Scheduling, Material Planning

             Works closely with Receiving Department

             Utilize MRP system

             Extensive database maintenance

             Communicate to various departments

    Requirements Include:

             High School Diploma or GED

             Minimum 2 years Purchasing Experience, preferably in a Manufacturing Environment

             Proficient with 10 key

             Must pass client pre-screening process

             Proficient in Microsoft Word, Outlook, PowerPoint and Excel

             Experienced with Shipping and Expediting of materials

             Basic Math Skills to process data

             Detail oriented and work with deadlines

             Working around moving mechanical parts

             Familiar with SAP programs

             Familiar with MAPICS AS400 system

             2-3 years in a manufacturing office environment with scheduling experience

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call our branch right away at 407.774.7770

     

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Packer]]> A Lake CIty Manufacturer seeks First Shift Packers

    • Day to Day scheduling
    • Shift typically starts between 7:00am - 8:30am
    • Up to 12 hour shifts, at times
    • 20-50 hours a week depending on production
    • Pay: $9.00/hr

    Responsibilities Include:

    • Packing food product into boxes
    • Unstack trays for others to fill with products
    • Prepare boxes to be filled

    Requirements Include:

    • Ability to safely work around moving machinery
    • Ability to keep work area clean throughout shift
    • Ability to perform repetitive tasks at a fast pace

    If interested please send a resume to: Erie@TRNstaffing.com or call 814-774-3842

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Dispatch Agent]]> Dispatch Agent

    Job Description:

    The ideal candidate for this position must have strong MS Office skills including Excel, PowerPoint and Word. Also required are excellent oral and written communication skills and a proven history of providing exceptional customer service at all levels. Our work environment is team oriented and very fast paced; therefore a strong candidate must have excellent organizational skills, time management skills in addition to a professional attitude and attire that exemplifies the client culture.

    Major Duties and Responsibilities:
    Provide daily operational reports that are accurate and timely
    Perform daily data entry for receiving, order allocation, shipping and inventory management within a warehouse management system
    Provide warehouse staff with necessary documents and information needed to complete receiving, and to ship orders
    Manage pickup and delivery activities
    Rate domestic transportation bills and improve execution and cost
    Provide support with other miscellaneous projects, filing and research

     

    Maintain Supplier list for pickup and deliveries, maintain rates, and negotiate rates


    Experience:

    Knowledge of truck/terminal freight or cross-dock operations
    Basic math skills
    Basic understanding of Tariff systems, rating, routing and pricing
    Expertise Lotus Notes
    Knowledge of local transportation market, 2 years domestic logistics experience

     

    Minimum AA degree

     

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call our branch immediately at 407.774.7770

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[General Labor]]> Conneaut, OH Manufacturer is seeking 2nd shift Extrusion Helper in Molding Dept.

             Pay Rate - $9.00 / hr. to start with pay increases during probationary period based on attendance and performance.

             Temp-to-hire - permanent opportunities!

             Great working and team oriented environment.

    Requirements Include:

             High School Diploma or G.E.D and ability to pass pre-employment testing.

             6 months or more manufacturing experience.

             Extrusion or plastics experience is a plus.

             Ability to occasionally lift up to 50 pounds

     

    If interested, please send work history or resume to Geneva@trnstaffing.com

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Electric Assembler]]> A Lake City, PA Manufacturer Seeking Full-Time Electronic Assemblers

    • Hours: 6am - 4pm, Monday - Thursday

    Responsibilities Include:

    • Work with productions/assembly instructions, parts lists, drawings and verbal instructions to assemble product
    • Position components manually or utilizing small hand tools
    • Occasionally operate simple equipment

    Requirements Include:

    • At least 6 months Electronic Assembly Experience
    • Ability to concentrate for long periods of time
    • HS Diploma/GED

     If interested please send a resume to: erie@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift/Material Handler]]>

    The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is one of the largest distribution centers in the South East. We are seeking Forklift Operators for this facility for both 1st and 3rd shifts.

    Leesburg Company seeks Full Time Forklift Operators! Great opportunity to grow with this company!

    • Must have Flexible Schedule Including Weekends
    • $11.75- $12.50 per hour, Depending on shift

    Duties Include:

    • Must have 2 years experience on a Sit Down Forklift in Racks
    • Receive, Pick, Stage and Replenish Orders
    • Packing and Loading onto Trucks
    • Maintain Inventory Control
    • Responsible for proper stock rotation

    Requirements Include:

    • High School Diploma or GED
    • Able to work every weekend and flexible with shifts
    • Experienced Forklift Operator
    • Able to lift up to 50 lbs.
    • Experienced in using an RFP Scanner
    • Able to work at higher level in warehouse
    • Freezer Experience Preferred

     If interested please send a resume to: winterpark@TRNstaffing.com

     and then call us at 407.774.7770

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Quality Inspector]]> QUALITY INSPECTOR
    2ND SHIFT - 230 PM - 10 PM
    $12-15/HR BOE

    Quality Inspector will maintain quality standard by approving incoming materials, in-process production and finished product; recording quality results. The candidate must be able to accurately follow written procedures, and perform audits in compliance with Quality Management System.

    • Conduct tests on product for a variety of qualities such as dimensions, performance, and mechanical or chemical characteristics
    • Be able to read common measuring devices (tapes, micrometer, caliper, etc.).
    • Tracking of key metrics to constantly drive continuous improvement
    • Problem solving skills & good common sense to make sound technical decisions

    Qualifications:

    • High school diploma or equivalent desired
    • Basic computer knowledge, Microsoft Office
    • Basic Mathematic skill
    • ISO quality experience desired
    • The ability to lift 50 pounds

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Mig/Tig Welder]]> Fixture Welder - Mig/Tig

    1st shift

    We have an immediate opening for a temp to hire TIG/MIG welder. This company offers competitive wages, benefits and a generous vacation program.

    • Robotic welding along with Fixture, production welding
    • Burn wire on mild steel
    • Solid fixture welder to meet production needs
    • GMAW .035 & .045
    • GTAW on AU & stainless
    • 12-16 ga material, 1/4" plate
    • Some tack welding

    Qualifications:

    • High school diploma or equivalent desired
    • At least 2 years of MIG and TIG welding experience
    • Must know how to fuse weld
    • Job shop experience in production environment required

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift]]> FORKLIFT
    1ST SHIFT
    $13+/hr

    Waukesha County manufacturer is looking for an experienced Forklift driver for 1st shift. This is a heavy manufacturing environment with tight lanes and traffic.  Must be skilled at maneuvering around cartons, equipment and product.  The company offers competitive wages, comprehensive benefits and advancement opportunity.

    • Forklift driver for the department.
    • Position would set up work stations in the department and move material from one location to another with forklift.
    • Must be willing to work in other areas and jobs as needed.

    Qualifications:

    • High school diploma preferred but not required
    • Must have previous Forklift experience in a manufacturing environment
    • Must have good communication skills
    • Bilingual is a plus

    If interested please send a resume to:  Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC T/C Operator]]> CNC Turning Center Operator

    Busy Milwaukee Machine shop is looking for CNC TC Operators to join their 2nd shift team.  This company offers a great starting wage, benefits and on-the-job training to learn set up.  These are short run pieces of up to a couple hundred at most.  Will be working with castings that can weigh up to 100+ lbs.  Overhead crane experience is very helpful.

    Qualifications:

    • High school diploma or equivalent
    • At least 2 years of CNC TC Operation experience; some set up helpful
    • Must be able to touch off tools, do off sets and inspect own parts
    • Must have strong shop math and blue print experience

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Plating Machine Operator]]> Plating Machine Operator - Electroplater
    1st shift - 530 am - 2 pm
    $10 - 12/hr BOE

    Great entry-level opportunity.  Candidates with Foundry experience are a great fit.

    Electroplating operator to take responsibility for and run all aspects of an electroplating production line. The candidate must be able to accurately follow written procedures, adjust bath chemistry, and be able to inspect raw and finished product using a variety of inspection methods and equipment.

    • Sets. Starts, and shutdowns electroplating lines
    • Works to achieve scheduling priorities on the line
    • Tracking of key metrics to constantly drive continuous improvement

    Qualifications:

    • High school diploma or equivalent desired
    • Strong math and chemistry understanding
    • Electroplating/Metal Finishing experience desired
    • ISO quality experience desired
    • Forklift license a plus
    • The ability to lift 50 pounds

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Lead Powder Coat Painter]]> Lead Powder Coat Painter

    Milwaukee fabricator is looking for a Lead Powder Coat Painter to join their growing team.  This position will assist the department supervisor as needed.  The company offers competitive wages, benefits and a generous vacation package.

    • Apply powder coat paint to highly visible parts
    • Will load and uload parts on the line as needed.
    • Inspect parts
    • Train others

    Qualifications:

    • High school diploma or equivalent desired
    • Must have a minimum of 3 years of Powder Coat Paint experience
    • Previous experience in a lead role is highly desired
    • Must work well within a team
    • Must be able to work in a fast-paced environment

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Set Up Welder]]> 2ND SHIFT 2:30 PM - 11PM
    $18.00 - $20.00/hour plus Shift Premium

    Waukesha County manufacturer is looking for experienced Set Up Welders to join their busy and growing team.  Company offers competitive wages, benefits and more.

    Perform MIG .035 welding and/or fabrication duties. Set-up, fit and position weldments having a number of parts, use welding fixtures, jigs, and table fabrication; or layout, fit and position weldments sequentially to create a custom stair lift. This position is responsible to work from prints, drawings and job layouts; use ruler, square and other measuring tools; grind to make a smooth cosmetic finish.

    Qualifications:

    • High school diploma or equivalent
    • 1 year welding experience
    • Ability to work from prints
    • Strong math and measurement skills
    • Operate hand/air tools and electric grinders
    • Must pass a destructive weld test
    • Lean manufacturing experience is a plus

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[OD Grinder]]>

    OD Grinder
    3rd shift
    Up to $20 based on experience

    Waukesha County emloyer is looking for OD Grinder to Setup and Operate precision grinding equipment, manual and CNC.   Will be working on custom orders that hold close tolerances.

    Responsible for setting up the machine and holding parts to established quality standards.

    Qualifications:

    • High school diploma or equivalent
    • Must have at least 1 year of OD Grinding experience
    • Carbide and high speed steel experienc highly desired

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[CNC Horizontal Boring Bar]]> CNC Horizontal Boring Mill Setup Programmer
    1st shift
    $20+ Based on Experience

    Machine shop is looking for a highly skliied CNC Horizontal Boring Mill Set Up Programmer to work with large parts ranging from #2000 to #34000.  This is very physical work that requires the ability to work from a platform and climb stairs throughout the shift.  Will be responsible for the set up and some programming at the machine.

    Qualifications:

    • High school diploma or equivalent
    • 3+ years experience working with large parts
    • Must have Horizontal Boring Mill 5 axis experience
    • Experience with Fanuc is preferred

    Benefits:

    • Very competitive wages
    • Comprehensive benefit package

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Mechanical Assembly]]> MECHANICAL ASSEMBLER
    Up to $17 BOE

    Assemble machines used in the heavy construction industry using hand and power tools. Skills in automotive, plumbing, HVAC, or carpentry are transferable to this assembly position.

    • Performs any assembly-type functions, using hand and power tools.
    • Operates overhead cranes, forklifts and other material handling equipment.
    • Weld, grind, and use pneumatic power tools.
    • Operates any equipment needed to perform job.
    • Performs related duties as needed by supervision.
    • Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
    • Analyze engineering drawings and build to print
    • Hitch rig, roll, flip and move large equipment
    • Load trucks for shipping

    Qualifications:

    • High school diploma or equivalent
    • At least 1 year of experience in a Mechanical Assembly role
    • Welding experience is a plus
    • Must have strong math and measurement skills
    • Must be able to lift up to 75 lbs.
    • This position requires the ability to climb and work from a ladder

    If interested please send a resume to: milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Chipper Grinder]]> Chipper Grinder
    1st; 5:00 am to 1:00 pm

    Waukesha County producer of High Quality castings for over 30 years is seeking a Chipper Grinder. This position is responsible for cleaning castings using various tools and grinders.  Full line of benefits available upon hire.

    Qualifications:

    • High school diploma or equivalent
    • Previous Foundry experience is desired
    • Must be able to count and read a clock
    • Must be able to speak, read and write English
    • Must be able to lift up to 70 lbs.

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Sales Assistant]]> Orlando Company seeks Full Time Sales Assistant for an Office Manager

             1st Shift, 40 hours,  Mon - Friday

             $15 per hour

    Duties Include:

             Reports to Office  Manager

             Maintain Files and Records

             Arrange international travel arrangements

             Monitor and balance inventories

             Verify Pricing

             Coordinate shipping status with all carriers

             Works closely with clients, exceptional relationship building

             Answer phones and emails

    Requirements Include:

             High School Diploma or GED

             Minimum 2 years High End Customer Service  Experience

             Must pass client pre-screening process

             Proficient in Microsoft Word, Outlook and Excel

             Experienced with Shipping and Expediting of materials

             Able to work after hours or share on call responsibilities with team and company provided phone

             Love animals

             Bilingual a plus!

     

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call us at 407.774.7770 today!

     

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Warehouse]]> 2nd shift - 1pm-9:30pm

    Growing Waukesha manufacturer is looking for Warehouse Worker for 2nd shift.  The responsibilities of this position include, but are not limited to the following:

    • Pull, pack and ship customer orders for Standard Tool catalog items
    • Package and label tool orders, verify quantity and shipping information, band and transfer to packing line
    • Verify counts and place incoming inventory items in proper storage locations
    • Operate UPS shipping computer and scale to weigh and label sealed packages
    • Place all outgoing packages into proper shipping container for pick-up by contract carrier
    • Daily cleaning of work area to maintain clean, orderly and safe working conditions

    Qualifications:

    • High school diploma or equivalent
    • At least 1 year of Warehouse experience
    • Must have an eye for detail and the ability to work with product numbers/codes
    • Forklift experience a plus

    If interested please send a resume to: Milwaukee@TRNstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Reach Truck]]> 2nd shift: Monday Friday. Off Saturday and Sunday. 3pm-11:30pm.
    Job Description
    Job Purpose:
    Keeps production supplied by retrieving materials and supplies; operating a forklift.

    Duties:
    * Plans supply and material requirements by studying production schedule; scheduling deliveries to production area.

    * Retrieves supplies and materials by studying specifications; locating and verifying supplies and materials; secures pallet on truck; moves pallet to production location.

    * Maintains inventory in production area by anticipating and tracking usage.

    * Monitors inventory by reporting discrepancies.

    * Clears production area by securing and moving finished pallets; moving empty pallets.

    * Documents actions by logging movement of supplies, materials, and finished goods.

    * Maintains safe work environment by watching out for foot traffic; following standards and procedures; complying with legal regulations.

    * Keeps forklift operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs.

    * Updates job knowledge by participating in educational opportunities.

    * Accomplishes warehousing and organization mission by completing related results as needed.

    Skills/Qualifications:
    Safety Management, Documentation Skills, Equipment Maintenance, Inventory Control, Dependability, Initiative, Handles Pressure, Coordination, Organization, Productivity, Data Entry Skills







    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Food Service]]> The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement.  Our client is one of the largest employers in Central Florida. We are seeking Event Servers for this Clermont location.

    Single day event, working in Clermont, great way to earn some extra cash!

             August 10th

             $10 per hour

             4pm 8pm

    Job Duties Include:

             Set up tables

             Serve Beer, Wine  and appetizers

             Assisting with Break down of event

    Job Requirements Include:

             High School Diploma or GED

             Ability to stand throughout shift

             Able to work until finished

             Follow Directions

             Customer Service oriented

             Must wear Black/White Button down shirt, Black slacks, Black shoes, no jewelry

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Customer Care Coordinator]]> Pay $28,000 Annual Salary
    1st Shift, 9AM-6PM
    Duties include:
    Maintain a customer experience driven attitude and serve as subject matter expert
    Make personal connections while communicating with customers, resolving concerns
    Contact customers regarding feedback provided on surveys
    Review, report, and analyze survey results and suggest changes based on trends in data
    Lead Customer Experience training for new hire staff
    Coordinate with management, quality assurance, and trainers regarding training concerns and process implementations
    Hold semiannual onboarding customer experience training courses to refresh staff on customer impact
    Ability to map out processes to determine feasibility of changes for the customer experience
    Liaison for accompanying management to meetings and submitting needed process improvements
    Organize meetings with management to discuss upcoming promotions to get feedback, questions, and concerns
    Key Performance Indicator reporting to compile statistics to supply staff with daily results
    Partner with departments throughout the company to identify and provide input on customer experience to meet the needs of all customers
    Research and train Customer Support on techniques and skills used in providing an ideal customer experience
    Other tasks assigned by management
    Requirements include:
    Strong, professional communication--verbal and written--skills
    Effective presentation skills
    Strong Customer Support knowledge to effectively deliver training
    2-4 years trainer/facilitator experience preferred
    Demonstrates high degree of professionalism, flexibility, and integrity
    Ability to work independently while contributing to overall team success
    Microsoft Office Word, Excel, PowerPoint, OneNote
    Wireless industry experience preferred
    Prescreen testing required

    If interested please send a resume to: Elizabethtown@trnstaffing.com
    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Packaging]]> Established Sanford Company Needs Packers to start immediately!

    • 2nd Shift, Monday thru Friday, 3pm 11pm
    • $9.10 per hour
    • Temp to Hire position
    • Excellent company with great benefits when hired

     

    Duties Include:

             Performs deburring of parts and sorts acceptable material from unacceptable material

    • Records Findings
    • Weigh and Measure
    • Package product and label
    • Assemble cardboard containers  

    Requirements Include:

    • High School Diploma or GED required
    • Able to lift up to 50lbs
    • Stand on feet through out shift
    • Able to follow instructions
    • Detail oriented
    • Basic math skills
    • At least one year prior experience packaging parts

     

    Will attend paid orientation on the first day and will train

     

    If interested please send a resume to: winterpark@trnstaffing.com

    And then call us at 407.774.7770

     

     

     

     

     

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Accounts Payable]]> Brooks, KY Company Seeking Accounts Payable Clerk III

    1St Shift Monday-Friday Pay Rate $16 Per Hour

    Job Description:

    Responsible for supporting the accounts payable activities in the facility, performing tasks requiring quick resolution of issues. Performs daily accounts payable activities such as maintenance of the general ledger and preparation of various accounting statements and financial reports. Responsible for preparing all payables and completing all standard operating procedures as required. Makes calls to vendors to clarify any questionable invoice items, prices or signatures; calls department for proper information and or data regarding invoice payments. Facilitates the payment process by ensuring all required documentation is accompanied with the payment request. Takes phone calls and responds to any questions from departments or vendors as it relates to invoice payments. Maintains frequent contact with internal and external customers in order to address all payment issues. Assists other corporate associates and the Regional Director of Finance. May assist other Accounts Payable Clerks in departmental initiatives. Performs related duties as assigned. Ability to communicate effectively both orally and in writing Knowledge of general accounting principles Strong interpersonal skills Ability to meet deadlines Strong mathematical and analytical skills Strong organizational skills; attention to detail; dependable Knowledge of Microsoft Office; Word, Excel, Outlook and Access

     

    Top 5 Qualifications

    1. 2+ years Accounts Payable experience

    2. Intermediate Skill Level in Excel & Outlook

    3. Knowledge of generally accepted accounting principles

    4. Strong mathematical and analytical skills

    5. Highly organized & attentive to details

     

    Education Requirements :

    Bachelor s degree desired but not required (equivalent experience may be substituted)

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com

    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[General Labor]]>

    Tasks:

    Sort materials that are wood, into appropriate containers for recycling.
    Operate, pallet jacks, power lifts, or front-end loaders to load bales, bundles, or other heavy items

    Detailed Work Activities:

    Record operational or production data.
    Cut industrial materials in preparation for fabrication or processing.
    Load materials into production equipment.
    Sort materials or products for processing, storing, shipping, or grading.

    Other requirements for this position:

    Must have high school diploma or GED
    Must have reliable transportation

    If interested please send a resume to: shorewood@TRNstaffing.com ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> Job Purpose: Set up, operate or tend machines or robots that perform processes to weld and treat metals/ alloys.
    Job Functions:
    Assemble, align and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
    Start, monitor, and adjust robotic welding productions lines.
    Remove part from welding machines and place final products into containers.
    Test and visually inspect completed workpieces for defects or quality issues, using leak tests.
    Job Requirements:
    Must be able to speak and read basic English to comply with positions, Safety, Plant & PPE procedures & requirements
    Must be willing to cross train
    Must comply with attendance and punctuality policy
    Must be able to lift 10 to 15 lbs. continuously
    Must be able to work required overtime
    If interested please send your resume to Lombard@trnstaffing.com
    ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]>
    The Reserves Network has partnered with a fully integrated third-party supply chain solutions provider who is seeking Material Handlers for their facility in Elwood, IL. This position will train on the sit-down forklift and will provide you with forklift certification!!!!

    Job Duties:
    Picking orders
    Moving, unloading and staring materials
    Ability to work in a fast pace environment
    Operate sit-down forklift
    Operate RF Scanning tools
    Verify and identify parts
    Remove damaged materials
    Other duties as assigned
    Requirements:
    Flexibility and availability are a plus
    Standing for the duration of the shift
    Ability to learn to operate sit-down forklifts
    Good organizational skills
    Excellent time management skills

    If interested please send a resume to: shorewood@trnstaffing.com ]]>
    Mon, 24 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Operator]]> Production Professionals - $10.00/$10.50 with shift differential

    Overtime Available

    Our client is a leading Washington Court House Ohio employee-centered manufacturer searching for Production Associates who are self directed, motivated with great leadership skills. Our company believes in quality of life for their team members offering every other weekend off for work life balance. These positions work a 2-2-3 schedule!

    Positions will lead to fulltime employment with 90 days of good attendance!

    BENEFITS PACKAGE: 

            $1 Pay increase during your first 90 days with good attendance.

            Annual pay increase

            200 days off per year

            Potential performance bonus

            401k

            Affordable Medical, Dental and Vision Insurance

            Company paid life insurance

            Paid Breaks

            Paid Holidays, Vacation, Sick Time - DURING FIRST YEAR

            Free Uniforms

    EXPERIENCE AND SKILLS: Ability to follow all safety policies and procedures Manufacturing procedures and processes Equipment operations (set-up, production goals and quality control) Ensures that all equipment is operated and maintained properly Ensures that a product produced meets quality specifications. Assists with troubleshooting problems on production lines. Maintains effective employee relations and positive working relationships with personnel in supporting departments.

    EDUCATION OR EXPERIENCE REQUIREMENTS:

       High School Diploma is not required Experience with troubleshooting and problem solving Excellent communication skills; positive attitude and team building skills

     

    Great Opportunity for full time employment - temp to hire after 90 days

     

    If interested please send a resume to: hillsboro@TRNstaffing.com

     

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Light Industrial and General Labor]]> The Reserves Network s  Hillsboro , Ohio office is continuously seeking job candidates to work in various Light Industrial and General Labor positions.  Potential job opportunities include:

     

    • Assembly
    • CNC Setup/Operators
    • Forklift Operators
    • Machinists
    • Material Handlers
    • Pickers/Packers
    • Quality Assurance
    • Shipping/Receiving
    • Warehouse
    • Welders

     

    If interested please send a resume to: hillsboro@TRNstaffing.com

     

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Worker]]> Production Workers - Tig Welders for a leading manufacturer of custom metal roll formed and stamped products in Sabina

    Requirements:

    • Must be able to produce product based on customer specifications and quality standards.
    • Package product
    • Lift up to 40 pounds and stand 8 to 10 hour a day
    • Good hand/eye coordination with excellent hand dexterity
    • Basic reading and math required
    Wage and Benefits:
    • $10.00/$10.50 shift premium
    • 2nd and 3rd shifts available
    • Affordable health, life, dental and vision insurance available

    $250 bonus after 30 days

    If interested please send a resume to: hillsboro@TRNstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Worker]]>  

    Welding (Spot Welder) Production Worker Assembly Forklift + Auditing + Counter + Hand Scanner + General Labor1st and 2nd Shifts available

     

    Responsibilities and Requirements:

     

            Each position will vary with responsibilities

            Good attendance

            Positive attitude and ability to work well in a team environment

            Must wear Steel Toed Boots above the ankle

            Previous manufacturing experience

            Ability to follow direction from supervisor

            Must be able to follow established procedures

            Requires basic reading, writing and numerical ability

            Effective verbal communication skills.

     

     

    Qualifications:

     

            Requires basic reading, writing and numerical ability

            Effective verbal communication skills

            Ability to lift up to 50 pounds

     

    Benefits:

    • Medical, RX,
    • Dental
    • Vision Benefits available (options available)
    • Weekly Pay
    • Referral Bonus
    • 90 day review

    If interested please send a resume to: hillsboro@trnstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Extrusion Operator]]> Manufacturing Company in Wilmington is seeking Extrusion Operators/Production Workers

     

     

    Position Summary

    Qualified candidate will be responsible for learning to run an extrusion line. Will be required to learn and demonstrate considerable skills, knowledge and experience related to running an extrusion line and all associated equipment. Candidate will display a commitment to Core Values.

     

    Requirements:

     

            Must have strong decision making, analytical skills 

            Ability to work cross functionally

            Excellent troubleshooting and problem solving skills

            Must be self directed, motivated and able to multi task

            HS diploma or GED required   Ability to work in hot or cold environment

                    

    Wage and Benefits

            $11.00/hr with .66 cent shift differential

            12 hour shift with a rotating schedule

            Affordable health, life, dental and vision insurance

            401K

            Direct Deposit

     

    If interested please send a resume to: hillsboro@TRNstaffing.com

     

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Assembly]]> Established company in Leesburg, Ohio is in need of assemblers and installers

     

    Requirements:

            Knowledge and skill with hand tools

            Good mechanical skills

            Working knowledge of safety and quality

            Good attendance record

            TIG welding experience is a plus

            Able to read tape measure

            Willing to travel for installations (average of one week at a time)

     

     

    Wage and Benefits:

            $12/hr for assemblers and $15.30/hr for installers

            1st and 2nd shifts available

            Per diem when traveling

            Affordable health, life, dental and vision insurance available

            401K

            Direct Deposit

    If interested please send a resume to: hillsboro@TRNstaffing.com

     

     

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Production Worker]]>  

    Our client has long been recognized as leader in the Leesburg, Ohio area with over 170 years in the design, manufacturing and wholesale of the highest quality products. Due to the recent expansion of their product line we are currently searching for candidates to fill our open positions for Temporary; Temp-to-Hire; Seasonal; Full Time opportunities.

    • Pay $10.00/$10.50 per/hr. shift differential

    Duties include:

    • Construct, assemble inspect products
    • Position and align product for assembly.
    • Maintain safe and clean working environment.
    • Maintain supplies to determine inventory level
    • Expediting orders
    • Contribute to team effort by accomplishing related results as needed.

    Requirements include:

    • Ability to troubleshoot.
    • Ability to think critically and solve problems.
    • Loading glass onto the line
    • Team oriented and works efficiently in groups
    • Ability to work in a fast-paced environment
    • Good hand-eye coordination
    • Must be able to stand for long periods of time

    Work Environment:

    Positions are rotated
    Growth opportunities
    Work 4 -10 hour shift and off 3 days (typically Friday; Saturday; Sunday)
    Some overtime available during busy season
    Temp-to-Hire and/or Seasonal/Temporary work

     

    Benefits:

    • World Class Staff
    • Friendly culture
    • Medical, RX, Dental, Vision Benefits available (options available)
    • Preventive services immunization and routine health screenings
    • Referral Bonus
    • Weekly Pay

    If interested please send a resume to: hillsboro@trnstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Industrial Electrician]]> The Reserves Network is searching for an Industrial Electrician for its client located in Akron, Ohio.

    1st shift
    $20-$22/hour

    Qualified candidates will possess the following skills:

    Installation, maintenance and troubleshooting of PLC's
    Ability to bend and run conduit
    Document and track changes to electrical drawings
    Work with prints
    Provide calibration on all instruments
    Hands on problem solving, analysis and troubleshooting
    Other duties as required

    This position is being offered temp to hire. Upon hire the company offers:

    Annual increase based on performance
    Year end bonus based on companies success
    401k with match effective immediately (No Wait Period)
    Tuition reimbursement
    Annual health fair and nurse on site
    Gym membership reimbursement

    If interested please send a resume to: akron@TRNstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[General Labor]]>
    All shifts available with an immediate need on 3rd shift
    Working Monday- Friday OT as needed

    Duties Include:
    Inspection of finished product
    Packing
    Trimming
    Palletizing

    Requirements:
    Basic math skills
    Ability to stand for 8 hour shift
    Ability to work overtime as needed
    Ability to lift up to 30 pounds


    If interested please send a resume to: Akron@trnstaffing.com
    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Packaging]]> Our Akron area client, a leader in the plastics industry, is in need of  several employees for packing department.  The selected candidates will enjoy a pay increase at hire and the opportunity to take advantage of piece work pay incentives.

    Job Duties;

    • Quality Control/Inspection of parts
    • Trimming
    • Packing

    Requirements;

    • MUST be able to train on 1st shift then be placed on either 2nd or 3rd shift.
    • Ability to stand for 8 hour shift
    • Ability to work in a hot environment
    • Ability to lift up to 50 pounds
    • $10.37/Hr (Plus piece work at hire)
    • Train on 1st with the flexibility to move to an off shift if needed
    • Several positions available to start ASAP

    This position is 30 days temp to hire.  Upon hire into this company selected candidate will be hired into a Union, have the opportunity to make an incentive per piece work, medical benefits and paid vacation.

    If interested please send a resume to: akron@trnstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Inventory]]>

    Inventory Project - 2 DAYs ONLY - Aug 18 & 19, 2017

    $17.24/hour - 10-12 hour work day - 7:00am-5:00pm (possibly 7:00pm)

    Ross County manufacturing facility seeking counters to assist with annual inventory count. 

    Requirements:

    • previous manufacturing experience
    • basic reading & math skill
    • accurate counting ability and attention to detail
    • ability to distinguish parts
    • have your own safety shoes
    • pass pre-employment screening

    If you are available to work a 10-12 hour shift on Friday (8/18) and/or Saturday (8/19), please call 740-773-7519 for information.  Positions are limited - Call Today! You may also apply online or email our team at: chillicothe@trnstaffing.com.

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Finisher]]> Fast growing Joliet Logistics Facility is in need of SXS builders

    7am-3:30pm mon-fri possible daily OT
    must be available for some saturdays

    use hand tools to Partial assemble Honda 4x4's. Quality control - will be responsible for final assemble working with Honda technicians. Heavy lifting

     

    If interested please send a resume to: shorewood@trnstaffing.com

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Paralegal]]> Seeking a Paralegal for Personal Injury Law Firm located in Tampa

    We are seeking a indidivudal who is looking to be part of a caring, professional, ethical and dynamic law firm.

    Skills required:

    • 5+ years of Personal Injury experience
    • BI, UM,PIP and PD exp
    • Fast paced environment
    • Working cases files from intake thru settlement
    • Good research skills using online databases

    This is and immediate opportunity, so if you are interested please send your resume to Resumes@tempwise.com.

    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Warehouse]]>
    Rosetta Technologies, 5912 Breckenridge Parkway, Suite B, Tampa, FL 33610, is currently seeking a Level (1 ) Laser Printer and Toner Cartridge Assembly Technician to join our team in Tampa, FL.

    Job Description
    The Level 1 Laser Printer and Toner Cartridge Assembly Technician is responsible for converting standard laser printers and toner cartridges to Rosetta Technologies-branded MICR printers and MICR cartridges

    Job Responsibilities:
    Performs production processes, involving Toner injection into cartridges that are ultimately responsible for fulfillment of orders for Rosetta Technologies unique MICR products. (We will teach you the processes)
    Specific responsibilities include dry toner cartridge/bottle filling and modification and conversion of laser printers. Backs up other employees in inventory control and shipping/receiving.
    Knowledge of using hand tools and small equipment.
    Familiarity with A/C and D/C electrical theory, digital electronics, Xerographic process, component assembly and disassembly, and laser printer repair desirable but not required.
    Reviews existing processes and develops solutions to increase productivity or reduce costs.
    Ensures compliance with approved production methods, inventory control, UPS and freight regulations, and quality standards.
    Relies on experience and judgment to plan and accomplish goals.
    Performs a variety of detailed tasks with a direct impact on customer satisfaction and the public image of the corporation.
    Attention to detail is required. VERY IMPORTANT!
    Works closely with procurement and accounting departments.
    Accountable 100% for defects in materials or workmanship of products produced and for proper packaging of products shipped to customers.
    Understand ISO procedures or know of its importance.
    General upkeep of the entire Plant- may ask to do general cleaning and/or maintenance.


    Requirements
    High School diploma required. Associates degree in electronic office machine repair, photocopier technician training, electronics, or a related field is a plus.
    Knowledge of how to properly drive and work with a fork lift also desired.
    Experience with UPS shipping technology desired, but not required.

    Compensation and Benefits:
    Compensation is commensurate with experience
    Benefits package available


    If interested: Please forward resumes to resumes@tempwise.com ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Forklift/Material Handler]]> Need to be able drive Order Picker and Stand up
    Need to show us a copy of the driving test and any certifications for drive
    Start time 8:30am End 5:00pm
    Reports to Jim Marcordes, first day of training
    Overtime as needed
    Perform other duties as assigned ( stacking, palletizing, unloading, tagging, etc. )
    Able to lift 75 pounds and 110 with 2 people
    ]]>
    Fri, 21 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> Medina company who manufacture fasteners is looking for a 2nd shift machine operator.  Good steady 40 hr weeks Mon-Fri with possible overtime.

             Pay: $10/hr

             Hours:  3:30PM - 11:30PM Mon-Fri

    Duties:

             Machine operation

             Clean up of area

             Check parts with gages

    Requirements:

              No experience required.

             Familiarity  with gages such as micrometers and calipers a plus.

             Steel toes

             Pre-placement screening

     

     

    If interested please send a resume to: brunwick@TRNstaffing.com

    ]]>
    Thu, 20 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]>

    Valley City, OH  Production workers needed for first, second, and third shift for Superior Roll Forming in Valley City (Medina County).

    • Pay $11-11.25/hr
    • Temp-Hire for the right candidate.
    • Great benefits once hired including career path opportunity and pay increase. 

      Duties include:

    • Running various machines
    • Visually inspect parts
    • Repack parts
    • Keep accurate counts of parts processed
    • Perform other responsibilities as determined by supervisor.

    Requirements include;

    • Must have some previous manufacturing experience.
    • Able to lift 50lbs.
    • Good communications skills are a must.
    • Excellent attention to detail.
    • Strong teamwork skills.
    • Excellent attendance required.
    • Pre-placement screening required.
    • Steel toe shoes required.

    If interested please send a resume to: brunswick@TRNstaffing.com

    ]]>
    Thu, 20 Jul 2017 00:00:00 EDT 0
    <![CDATA[Machine Operator]]> International manufacturing leader of high performance OEM and aftermarket products for the military; motorsports and aerospace markets with unparalleled performance and durability are expanding and hiring their workforce.    

     

    What we offer:

     

             A great culture with room for growth; pay increases

             Training programs allowing employees to achieve career goals

             Environment of integrity, respect, and development

             Challenge and growth opportunities

             Outstanding benefits package

     

    Responsibilities Include: 

     

    • Operate machine by making adjustments and material requirements
    • Assure machine  operating productively and safely
    • Ability to  perform job duties according to company standard operations
    • Accurately complete machine functions using
    • Set stops or guides to specified length as indicated by scale, ruler or template
    • Perform quality assurance while operating your machine
    • Responsible for cleaning work area (excluding moving parts)

     

    Requirements:

     

    • Previous manufacturing experience helpful but not required
    • Possess the ability to follow instructions specific to company standards
    • Good technical skills and mechanically inclined
    • Work well with other team members
    • Follow Safety Standards
    • Ability to lift and move up to 50lbs.

     

    World Class Benefits: 

     

             Temp-to-Hire with  benefits upon hire after 1 month

             Comprehensive Medical Plan

             Dental Coverage

             Life Insurance Coverage

             Prescription Drug Program

             Discount Vision Plan

             Wellness Programs

             Employee Assistance Program

             Bonus/Incentive Programs

             401K with Company Contributions

             Paid Vacation Days/Paid Holidays

     

     

    If interested please send a resume to: brunswick@TRNstaffing.com

    KEYWORD :  Entry Level Machine Operator;  Machine Operator; Machine Set-Up, Operator; Machinist 

     

    ]]>
    Thu, 20 Jul 2017 00:00:00 EDT 0
    <![CDATA[Material Handler]]> Valley City warehouse seeking a full time Material Handler

             Hours  2pm-10pm Monday-Friday

             Pay: $10/hr

             Temp-to-hire opportunity

    Duties include:

             Operate reach truck/cherry pickers

             Order Picking

    Requirements include: